Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC/ABS C2950-76701 SABIC INNOVATIVE US
CYCOLAC™
Electrical field、Electronic field、Household appliances、Household appliances、Automotive sector
Flame retardant、High mobility、High impact resistance、High temperature resistan、heat-resisting
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Thermal Conductivity | ASTM C 177 | 0.2 W/m-°C | |
| Relative Temperature Index | UL 746B | 85 °C | |
| Vicat Softening Temperature | Rate B/50 | ASTM D1525 | 85 °C |
| Coefficient of Linear Thermal Expansion(Across Flow) | -30°C to 3 | ASTM E831 | 72 E-6/°C |
| Coefficient of Linear Thermal Expansion(Flow) | -30°C to 3 | ASTM E831 | 72 E-6/°C |
| Flammability Properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Flame Rating | UL94 | 2.49 mm | |
| Oxygen Index | ASTM D 2863 | 32 % |
| Hardness | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Rockwell hardness R | ASTM D785 | 123 R |
| Physical | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Melt Mass-Flow Rate | ASTM D1238 | 10 g/10min | |
| Modeling Shrinkage(Across Flow) | flow, 3.2 | Internal | 0.4~0.8 |
| xflow, 3.2 | Internal | 0.4~0.6 | |
| Moisture Absorption | flow, 3.2 | ASTM D570 | 0.4 |
| 24 hours | ASTM D570 | 0.1 |
| Mechanical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Flexural Modulus | 2.6 mm/ | ASTM D790 | 2650 Mpa |
| Tensile Strength(Yield) | Type I, 50 | ASTM D638 | 62 Mpa |
| 2.6 mm/ | ASTM D790 | 102 Mpa | |
| Tensile Elongation?(Break) | Type I, 50 | ASTM D638 | 40 |
| Impact Properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Notched Izod Impact Strength (23℃) | ASTM D256 | 160 J/m | |
| Instrumented Dart Impact (-30℃) | ASTM D3763 | 54 J | |
| Notched Izod Impact Strength 23℃ | ASTM D256 | 534 J/m | |
| Instrumented Dart Impact (23℃) | ASTM D3763 | 61 J |
| Electrical Properties | Test Condition | Test Method | SABIC INNOVATIVE US/C2950-76701 |
|---|---|---|---|
| Arc Resistance | ASTM D495 | 6 plc | |
| Dielectric Constant (100Hz) | ASTM D 150 | 3 | |
| Comparative Tracking Index | UL 746A | 0 plc | |
| High Amp Arc Ignition | UL 746A | 0 plc | |
| Volume Resistivity | ASTM D257 | 100000000000000000 ohm-cm | |
| Dissipation Factor? | ASTM D 150 | 49 E-4 | |
| High Voltage Arc Tracking Rate | UL 746A | 2 plc | |
| Surface Resistivity | ASTM D257 | 10000000000000000 Ohm | |
| Hot-wire Ignition | UL 746A | 1 plc | |
| Dielectric Constant (50/60Hz) | ASTM D 150 | 3 | |
| Insulation strength | in oil, 3.2 | ASTM D149 | 19.5 kV/mm |
Contact Us
Get App
Top