Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
API Pyramid™ PI010 Polymics, Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 0.318mm | ASTM D256 | 4300 J/m |
| hardness | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 57 |
| Electrical performance | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1E+14 ohms·cm | |
| dielectric strength | ASTM D149 | 22 kV/mm | |
| Surface Resistivity | ASTM D257 | 1E+16 ohms | |
| Dissipation Factor | 1MHz | ASTM D150 | 2E-03 |
| Mechanical properties | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 7.0 % |
| tensile strength | ASTM D638 | 86.0 MPa | |
| Flexural modulus | ASTM D790 | 3100 MPa | |
| coefficient of friction | Dynamic | ASTM D1894 | 0.29 |
| bending strength | ASTM D790 | 110 MPa |
| flammability | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.20 % |
| density | ASTM D792 | 1.42 g/cm³ |
| Thermal performance | Test Condition | Test Method | Polymics, Ltd./Pyramid™ PI010 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 380 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.4E-05 cm/cm/°C |
Contact Us
Get App
Top