Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC 141R-111 SABIC INNOVATIVE US
LEXAN™
--
transparent,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | SABIC INNOVATIVE US/141R-111 |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 10.5 g/10min |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/141R-111 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa | ASTM D-648 | 132 °C |
| 0.45MPa | ASTM D-648 | 137 °C | |
| Linear coefficient of thermal expansion | E831 | 6.8×10 1/°C | |
| Long term use temperature | UL 746B | 130 °C | |
| UL flame retardant rating | UL 94 | 1.1 mm | |
| UL94 | HB | ||
| Vicat softening temperature | ASTM D-1525 | 154 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/141R-111 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 2343 Mpa | |
| bending strength | ASTM D-790 | 96 Mpa | |
| Elongation at Break | Break点 | ASTM D-638 | 130 % |
| Impact strength of cantilever beam gap | Notched23°C | ASTM D-256 | 800 J/m |
| Rockwell hardness | R | ASTM D-785 | 118 |
| tensile strength | Break点 | ASTM D-638 | 69 Mpa |
| 屈伏点 | ASTM D-638 | 62 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/141R-111 |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D-150 | 2.96 |
| 60Hz | ASTM D-150 | 3.17 | |
| Dissipation factor | 1MHz | ASTM D-150 | 0.01 |
| 60Hz | ASTM D-150 | 0.0009 | |
| Volume resistivity | ASTM D-257 | 1.0×10 ohm-cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/141R-111 |
|---|---|---|---|
| density | ASTM D-792 | 1.2 | |
| Shrinkage rate | 3.2mm | ASTM D-955 | 5-7 10 |
| Water absorption rate | % | ASTM D-570 | 0.15 |