Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA66 MR001 ASAHI JAPAN

Leona™

Automotive Applications,Gears

high strength,High rigidity

Plastic Datasheets

hardness	Test Condition	Test Method	ASAHI JAPAN/MR001
Rockwell hardness	M-Sale	ASTM D785	85
		M-Sale	ISO 2039-2	85
		R-Sale	ISO 2039-2	120
		R-Sale	ASTM D785	120

Basic Performance	Test Condition	Test Method	ASAHI JAPAN/MR001
Water absorption rate	湿		1.5 %

thermal performance	Test Condition	Test Method	ASAHI JAPAN/MR001
Combustibility (rate)		UL 94	HB
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	160 °C
		0.45MPa,Unannealed	ISO 75-2/B	229 °C
		HDT	ASTM D648/ISO 75	240 ℃（℉）
		1.82MPa,干	ASTM D-648	160 °C
		1.8MPa,Unannealed	ISO 75-2/A	118 °C
		0.45MPa,Unannealed	ASTM D648	240 °C
		0.46MPa,干	ASTM D-648	240 °C
Linear coefficient of thermal expansion	MD	ASTM D696	6E-05 cm/cm/°C
			ASTM D696/ISO 11359	6 mm/mm.℃
		干	ASTM D-696	6
UL flame retardant rating	干	UL 94	HB

mechanical properties	Test Condition	Test Method	ASAHI JAPAN/MR001
Bending modulus		ASTM D790	5600 Mpa
		23°C	ISO 178	5800 Mpa
			ASTM D790/ISO 178	5590(MPa) kg·cm/cm(J/M)ft·lb/in
bending strength	干(湿)	ASTM D-790	157(98) Mpa
			ASTM D790/ISO 178	157(MPa) kg·cm/cm(J/M)ft·lb/in
		23°C	ISO 178	150 Mpa
			ASTM D790	157 Mpa
elongation	Break	ASTM D638	6.0 %
Elongation at Break	干(湿)	ASTM D-638	6(7) %
flexural coefficient	干(湿)	ASTM D-790	5.6(3.3) GPa
Impact strength of cantilever beam gap	干(湿)	ASTM D-256	34(39) J/m
Rockwell hardness		ASTM D785	R120
		干(湿)	ASTM D-785	85(60) M Scale
		干(湿)	ASTM D-785	120(108) R scale
Taber abraser	1000Cycles	ASTM D1044	-- mg
Tensile modulus	23°C	ISO 527-2	5900 Mpa
Tensile strain	Yield,23°C	ISO 527-2	-- %
Tensile strain		Break,23°C	ISO 527-2	5.5 %
tensile strength	Break,23°C	ISO 527-2	93.0 Mpa
		干(湿)	ASTM D-638	98(67) Mpa
			ASTM D638	98.0 Mpa
		Yield,23°C	ISO 527-2	-- Mpa

Electrical performance	Test Method	ASAHI JAPAN/MR001
Arc resistance	ASTM D495/IEC 60112	87
Dielectric strength	IEC 60243-1	22 KV/mm
Dielectric strength		ASTM D149	22 KV/mm
Surface resistivity	ASTM D257	1E+13 ohms
Surface resistivity		IEC 60093	1E+13 ohms
Volume resistivity	ASTM D257	1E+14 ohms·cm
Volume resistivity	23°C	IEC 60093	1E+14 ohms·cm

Physical properties	Test Condition	Test Method	ASAHI JAPAN/MR001
density		ASTM D792/ISO 1183	1.52
Shrinkage rate		ASTM D955	1.0-1.1 %
		MD	Internal Method	1.0-1.1 %
		干	旭化成方法	1.0-1.1 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	-- %
		Saturation,23°C		-- %
			ASTM D570/ISO 62	1.5 %
Wear factor	湿	ASTM D-1044	22

impact performance	Test Condition	Test Method	ASAHI JAPAN/MR001
Impact strength of simply supported beam without notch		ISO 179	62 kJ/m²

flammability	Test Condition	Test Method	ASAHI JAPAN/MR001
UL flame retardant rating	0.75mm	UL 94	HB

Get App

Top