Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM LT350 ASAHI JAPAN
TENAC™-C
Electrical field,Electronic field,Industrial applications,Automotive sector,Shell,Engineering accessories,Engine parts
copolymer,wear resistant,high viscosity,Low friction coefficient,High lubrication
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ASAHI JAPAN/LT350 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 152 °C |
1.8MPa,Unannealed | ISO 75-2/A | 85.0 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 1E-04 cm/cm/°C |
mechanical properties | Test Condition | Test Method | ASAHI JAPAN/LT350 |
---|---|---|---|
Bending modulus | -- | ISO 178 | 2300 Mpa |
-- | ASTM D790 | 2350 Mpa | |
bending strength | ASTM D790 | 78.0 Mpa | |
elongation | Break | ASTMD638 | 45 % |
Tensile modulus | ISO 527-2 | 2500 Mpa | |
tensile strength | -- | ASTM D638 | 56.0 Mpa |
Yield | ISO 527-2 | 58.0 Mpa |
other | Test Condition | Test Method | ASAHI JAPAN/LT350 |
---|---|---|---|
characteristic | 高冲击强度 良好的耐摩擦和磨耗性 | ||
purpose | 办公室仪器的轴承.齿轮 车辆配件 |
Physical properties | Test Condition | Test Method | ASAHI JAPAN/LT350 |
---|---|---|---|
melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 3.0 g/10min |
Shrinkage rate | MD | Internal Method | 1.6-2.0 % |
Water absorption rate | 23°C,24hr,50%RH | ASTM D570 | 0.20 % |
flammability | Test Condition | Test Method | ASAHI JAPAN/LT350 |
---|---|---|---|
UL flame retardant rating | UL 94 | HB |