Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT AV2 340 XL DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM Additive Manufacturing/ AV2 340 XL |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 8.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 40 kJ/m² |
| Mechanical properties | Test Condition | Test Method | DSM Additive Manufacturing/ AV2 340 XL |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | 2.9 % |
| Tensile modulus | ISO 527-2 | 7900 MPa | |
| tensile strength | 断裂 | ISO 527-2 | 150 MPa |
| Electrical performance | Test Condition | Test Method | DSM Additive Manufacturing/ AV2 340 XL |
|---|---|---|---|
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm |
| flammability | Test Condition | Test Method | DSM Additive Manufacturing/ AV2 340 XL |
|---|---|---|---|
| UL flame retardant rating | 0.78mm | IEC 60695-11-10,-20 | HB |
| 1.6mm | IEC 60695-11-10,-20 | HB |
| physical property | Test Condition | Test Method | DSM Additive Manufacturing/ AV2 340 XL |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 1.1 % |
| MD | ISO 294-4 | 0.40 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.25 % |
| 饱和,23°C | ISO 62 | 0.50 % | |
| density | ISO 1183 | 1.52 g/cm³ |
| Thermal performance | Test Condition | Test Method | DSM Additive Manufacturing/ AV2 340 XL |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 225 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 245 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 210 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 3E-05 cm/cm/°C |
| TD | ISO 11359-2 | 7E-05 cm/cm/°C |
Contact Us
Get App
Top