Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

COC 6015S-04 JAPAN POLYPLASTIC
TOPAS®
LCD application,Optical applications
Dimensional stability,Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
Glass transition temperature | ISO 11357-2 | 158 °C | |
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 150 °C |
Vicat softening temperature | ISO 306/B50 | 156 °C |
mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
Tensile modulus | ISO 527-2/1A/1 | 3000 Mpa | |
Tensile strain | Yield | ISO 527-2/1A/50 | 2.5 % |
tensile strength | Yield | ISO 527-2/1A/50 | 60.0 Mpa |
Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
Dissipation factor | 1.00GHz | IEC 60250 | 7E-05 |
Relative permittivity | 10kHz | IEC 60250 | 2.35 |
1kHz | IEC 60250 | 2.35 | |
Volume resistivity | IEC 60093 | >1.0E+16 ohms·cm |
Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
melt mass-flow rate | 260°C/2.16kg | ISO 1133 | 3.7 g/10min |
Melt Volume Flow Rate (MVR) | 260°C/2.16kg | ISO 1133 | 4.00 cm3/10min |
Shrinkage rate | Internal Method | 0.50-0.70 % | |
Water absorption rate | Saturation,23°C | ISO 62 | 0.010 % |
impact performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 15 kJ/m² |
flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
UL flame retardant rating | 1.6mm | UL 94 | HB |
optical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/6015S-04 |
---|---|---|---|
Refractive index | ISO 489 | 1.530 | |
transmissivity | ISO 13468-2 | 91.0 % |