Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA12 E40-S3 EVONIK GERMANY
VESTAMID®
Automotive Applications
Electrical performance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
Shore hardness | ShoreD | ISO 868 | 40 |
thermal performance | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 55.0 °C |
Linear coefficient of thermal expansion | MD:23to55°C | ISO 11359-2 | 2.4E-04 cm/cm/°C |
TD:23to55°C | ISO 11359-2 | 2.1E-04 cm/cm/°C | |
Vicat softening temperature | -- | ISO 306/B | 60.0 °C |
-- | ISO 306/A | 125 °C |
mechanical properties | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
Tensile creep modulus | 1000hr | ISO 899-1 | 60.0 Mpa |
Tensile modulus | ISO 527-2 | 80.0 Mpa | |
Tensile strain | Break | ISO 527-2 | >200 % |
tensile strength | 50%Strain | ISO 527-2 | 9.50 Mpa |
-- | ISO 527-2 | 17.0 Mpa |
Electrical performance | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
Compared to the anti leakage trace index | SolutionA | IEC 60112 | PLC 0 |
Dielectric strength | IEC 60243-1 | 35 KV/mm | |
Dissipation factor | 23°C,100Hz | IEC 60250 | 0.070 |
23°C,1MHz | IEC 60250 | 0.12 | |
Relative permittivity | 23°C,1MHz | IEC 60250 | 4.90 |
23°C,100Hz | IEC 60250 | 7.50 | |
Surface resistivity | IEC 60093 | 1E+13 ohms | |
Volume resistivity | IEC 60093 | 1E+11 ohms·cm |
Physical properties | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.60-0.90 % |
TD | ISO 294-4 | 0.70-1.3 % | |
Stickiness | ISO 307 | 190 cm³/g | |
Water absorption rate | Saturation,23°C | ISO 62 | 1.0 % |
impact performance | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
23°C | ISO 179/1eU | NoBreak |
flammability | Test Condition | Test Method | EVONIK GERMANY/E40-S3 |
---|---|---|---|
UL flame retardant rating | 1.6mm | UL 94 | HB |