Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS 1130T JAPAN POLYPLASTIC
DURAFIDE®
Fiber grade
Flame retardant、High impact resistance、Glass fiber reinforced、enhance、Filler: Glass fiber reinf、30%、Filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| Rockwell hardness | M级 | ISO 2039-2 | 85 |
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| ColorNumber | HD9050 |
| Mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| bending strength | ISO 178 | 220 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 2.3 % |
| Flexural modulus | ISO 178 | 8800 Mpa | |
| tensile strength | ISO 527-2 | 155 Mpa |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| Dissipation Factor | 1kHz | IEC 60250 | 3E-03 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 4 | |
| relative permittivity | 1kHz | IEC 60250 | 3.90 |
| Dissipation Factor | 耐电弧性 | IEC 60250 | 123 sec |
| Volume resistivity | IEC 60093 | 8E+15 ohms·cm | |
| dielectric strength | 3.00mm | IEC 60243-1 | 18 KV/mm |
| relative permittivity | 1MHz | IEC 60250 | 3.90 |
| Dissipation Factor | 1MHz | IEC 60250 | 4E-03 |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| Water absorption rate | 23°C,24hr | ISO 62 | 0.060 % |
| melt viscosity | 310°C,1000sec^-1 | ISO 11443 | 400000 mPa·s |
| Thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/1130T |
|---|---|---|---|
| Linear coefficient of thermal expansion | TD | 内部方法 | 4E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 255 °C |
| Linear coefficient of thermal expansion | MD | 内部方法 | 2E-05 cm/cm/°C |
Contact Us
Get App
Top