plas
Log In
CategoriesAll

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM 127UV NC010 DUPONT USA
Delrin®
Profile,Plate,Automotive Interior Parts,Automotive sector,Automotive interior parts
Low wear,Photostability,Low volatility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodDUPONT USA/127UV NC010
Rockwell hardnessM-SaleISO 2039-292
R-SaleISO 2039-2120
Supplementary InformationTest ConditionTest MethodDUPONT USA/127UV NC010
EmissionVDA275<8.00 mg/kg
EmissionofOrganicCompoundsVDA27716.0 µgC/g
OdorVDA2703.00
thermal performanceTest ConditionTest MethodDUPONT USA/127UV NC010
AnnealingTemperature160 °C
AnnealingTime-Optional30.0 min/mm
Hot deformation temperature0.45MPa,UnannealedISO 75-2/B160 °C
1.8MPa,UnannealedISO 75-2/A93.0 °C
Linear coefficient of thermal expansionTDISO 11359-21.1E-04 cm/cm/°C
MDISO 11359-21.2E-04 cm/cm/°C
Melting temperatureISO 11357-3178 °C
Vicat softening temperatureISO 306/B50160 °C
mechanical propertiesTest ConditionTest MethodDUPONT USA/127UV NC010
Bending modulusISO 1782700 Mpa
bending strength3.5%StrainISO 17880.5 Mpa
--ISO 17872.0 Mpa
Nominal tensile fracture strainISO 527-245 %
Tensile modulusISO 527-23000 Mpa
Tensile strainYieldISO 527-223 %
tensile strengthYieldISO 527-270.0 Mpa
Electrical performanceTest ConditionTest MethodDUPONT USA/127UV NC010
Compared to the anti leakage trace indexIEC 60112PLC 0
Relative permittivity100HzIEC 602503.50
1MHzIEC 602503.40
Volume resistivityIEC 600931E+13 ohms·cm
Physical propertiesTest ConditionTest MethodDUPONT USA/127UV NC010
densityISO 11831.42 g/cm³
melt mass-flow rate190°C/2.16kgISO 11332.4 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11331.90 cm3/10min
Shrinkage rateMDISO 294-42.1 %
TDISO 294-41.9 %
Water absorption rateEquilibrium,23°C,2.00mm,50%RHISO 620.30 %
23°C,24hrISO 620.50 %
Saturation,23°C,2.00mmISO 621.2 %
impact performanceTest ConditionTest MethodDUPONT USA/127UV NC010
Charpy Notched Impact Strength23°CISO 179/1eA15 kJ/m²
-30°CISO 179/1eA11 kJ/m²
Impact strength of cantilever beam gap-40°CISO 180/1A11 kJ/m²
23°CISO 180/1A13 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU350 kJ/m²
23°CISO 179/1eU400 kJ/m²
flammabilityTest ConditionTest MethodDUPONT USA/127UV NC010
Burning rate1.00mmISO 379528 mm/min
FMVSS flammabilityFMVSS302B
Fogging-G-valuecondensateISO 64521.5E-04 g
UL flame retardant rating0.8mmIEC 60695-11-10,-20HB
0.8mmUL 94HB

Contact Us

Get App

Top