Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PI, TS APICAL 200AV Kaneka Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| film | Test Condition | Test Method | Kaneka Corporation/APICAL 200AV |
|---|---|---|---|
| Elmendorf tear strength | MD | ASTM D1922 | 16 g |
| Secant modulus | ASTM D882 | 3170 MPa | |
| elongation | 断裂 | ASTM D882 | 95 % |
| film thickness | 51 µm | ||
| tensile strength | 断裂 | ASTM D882 | 241 MPa |
| Electrical performance | Test Condition | Test Method | Kaneka Corporation/APICAL 200AV |
|---|---|---|---|
| Dissipation Factor | 1kHz | ASTM D150 | 1.4E-03 |
| Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 220 kV/mm | |
| dielectric constant | 1kHz | ASTM D150 | 3.40 |
| Hot wire ignition (HWI) | 0.0500mm | UL 746 | PLC 0 sec |
| Mechanical properties | Test Condition | Test Method | Kaneka Corporation/APICAL 200AV |
|---|---|---|---|
| coefficient of friction | 与自身-静态 | ASTM D1894 | 0.50 |
| flammability | Test Condition | Test Method | Kaneka Corporation/APICAL 200AV |
|---|---|---|---|
| UL flame retardant rating | 0.050mm | UL 94 | V-0 |
| Limiting Oxygen Index | ASTM D2863 | 38 % |
| physical property | Test Condition | Test Method | Kaneka Corporation/APICAL 200AV |
|---|---|---|---|
| density | ASTM D1505 | 1.42 g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 4E-03 % |
| Water absorption rate | 24hr | ASTM D570 | 2.9 % |
| Thermal performance | Test Condition | Test Method | Kaneka Corporation/APICAL 200AV |
|---|---|---|---|
| RTI Elec | 0.050mm | UL 746 | 240 °C |
| RTI | 0.050mm | UL 746 | 200 °C |
| specific heat | ASTMC351 | 1100 J/kg/°C |
Contact Us
Get App
Top