Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC K-30UV KOTEC JAPAN
CARBO TEX
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | KOTEC JAPAN/K-30UV |
|---|---|---|---|
| bending strength | ASTM D790/ISO 178 | 87 kg/cm²(MPa)[Lb/in²] | |
| Flexural modulus | - | ASTM D790 | 2160 Mpa |
| tensile strength | - | ASTM D638 | 63 Mpa |
| bending strength | - | ASTM D790 | 85 Mpa |
| tensile strength | - | ASTM D638 | 640 Kgf/cm |
| Flexural modulus | - | ASTM D790 | 22000 Kgf/cm |
| tensile strength | ASTM D638/ISO 527 | 62 kg/cm²(MPa)[Lb/in²] | |
| IZOD impact strength | - | ASTM D256 | 80 Kgf.cm/cm |
| bending strength | - | ASTM D790 | 12400 Ibf/in |
| elongation | 断裂 | ASTM D638 | 120 % |
| IZOD impact strength | - | ASTM D256 | 780 J/m |
| - | ASTM D256 | 15 ft.ibf/in | |
| tensile strength | - | ASTM D638 | 9100 Ibf/in |
| bending strength | - | ASTM D790 | 870 Kgf/cm |
| Flexural modulus | - | ASTM D790 | 313000 Ibf/in |
| Electrical performance | Test Condition | Test Method | KOTEC JAPAN/K-30UV |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 10 Ω.cm |
| Physical properties | Test Condition | Test Method | KOTEC JAPAN/K-30UV |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.2 |
| Thermal performance | Test Condition | Test Method | KOTEC JAPAN/K-30UV |
|---|---|---|---|
| -，18.6kg/cm | ASTM D648 | 133 °C | |
| melt mass-flow rate | 300℃,1.2kg | ASTM D1238 | 15 g/10min |
| -，18.6kg/cm | ASTM D648 | 271 ℉ | |
| heat resistance | ASTM D257 | V-2 |
Contact Us
Get App
Top