Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Witcom PA6 2005/43-HF Witcom Engineering Plastics B.V.
--
--
Filler, Witcom, Netherlands Witcom
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom PA6 2005/43-HF |
|---|---|---|---|
| Flexural modulus | 23°C | ISO 178 | 15000 MPa |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6 kJ/m² |
| tensile strength | 23°C | ISO 527-2 | <140 MPa |
| elongation at break | 23°C | ISO 527-2 | 3 % |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 40 kJ/m² |
| bending strength | 23°C | ISO 178 | 205 MPa |
| Flame retardant performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom PA6 2005/43-HF |
|---|---|---|---|
| UL flame retardant rating | UL -94 | V-0 3.20mm | |
| GWIT | 1.60mm | IEC 60695-2-12 | 960 °C |
| physical property | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom PA6 2005/43-HF |
|---|---|---|---|
| Water absorption rate | (23°C,饱和) | ISO 62 | 4.2 % |
| density | ISO 1183 | 1.33 g/cm³ | |
| Water absorption rate | 收缩率 | ISO 2577 | 0.20-0.40 % |
| (23°C,50RH) | ISO 62 | 1.3 % |
| Thermal performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom PA6 2005/43-HF |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa退火，HDT | ISO 75-2/Af | 200 °C |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 2.7E-05 cm/cm／°C |
Contact Us
Get App
Top