Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO(PPE)+TPE NORYL™ WCA875 resin SABIC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SABIC/NORYL™ WCA875 resin |
|---|---|---|---|
| Shore hardness | 邵氏A,30秒 | ASTM D2240 | 87 |
| Mechanical properties | Test Condition | Test Method | SABIC/NORYL™ WCA875 resin |
|---|---|---|---|
| elongation | 断裂2 | ASTM D638 | 180 % |
| 断裂,136°C3 | UL 1581 | 190 % | |
| 断裂 | UL 1581 | 250 % | |
| Flexural modulus | 100mmSpan | ASTM D790 | 48.0 MPa |
| ISO 178 | 45.0 MPa | ||
| tensile strength | 断裂,136°C3 | UL 1581 | 26.0 MPa |
| Tensile strain | 断裂 | ISO 527-2/50 | 170 % |
| tensile strength | 断裂 | ISO 527-2/50 | 16.0 MPa |
| 断裂 | UL 1581 | 27.0 MPa | |
| 断裂2 | ASTM D638 | 16.0 MPa |
| Electrical performance | Test Condition | Test Method | SABIC/NORYL™ WCA875 resin |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| Volume resistivity | ASTM D257 | 2.2to1.0E+17 ohms·cm | |
| dielectric strength | 2.00mm,inOil | IEC 60243-1 | 23 kV/mm |
| relative permittivity | 1MHz | IEC 60250 | 2.70 |
| Dissipation Factor | 1MHz | IEC 60250 | 3.5E-03 |
| flammability | Test Condition | Test Method | SABIC/NORYL™ WCA875 resin |
|---|---|---|---|
| Smoke density | Non-Flame,0.5mmplaque,Ds,max | ASTME662 | 110 |
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
| VW | UL 1581 | Pass | |
| Hot filament ignition temperature | 3.0mm | IEC 60695-2-13 | 800 °C |
| Smoke density | Flame,0.5mmplaque,Ds,max | ASTME662 | 150 |
| Limiting Oxygen Index | ISO 4589-2 | 29 % |
| physical property | Test Condition | Test Method | SABIC/NORYL™ WCA875 resin |
|---|---|---|---|
| density | ASTM D792 | 1.03 g/cm³ | |
| melt mass-flow rate | 250°C/10.0kg | ASTM D1238 | 16 g/10min |
| Thermal performance | Test Condition | Test Method | SABIC/NORYL™ WCA875 resin |
|---|---|---|---|
| Heat distortion temperature | 121°C | UL 1581 | 10 % |
| brittle temperature | ASTM D746 | <-40.0 °C | |
| UL temperature rating | UL 1581 | 105 °C |
Contact Us
Get App
Top