Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC FXE1414L WH9E515 SABIC INNOVATIVE NANSHA

LEXAN™

Electrical appliances,Electronic field,Electrical field,Household appliances

Low temperature resistanc,transparent,Flame retardant

Plastic Datasheets

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414L WH9E515
Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	121 °C
Hot deformation temperature		1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span8	ISO 75-2/Af	118 °C
Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	6.7E-5 cm/cm/°C
		Across Flow : -40°C	ISO 11359-2	8.2E-5 cm/cm/°C
		Flow : -40 to 40°C	ASTM E831	7.0E-5 cm/cm/°C
Vicat softening temperature	--	ASTM D15259	138 °C
Vicat softening temperature		--	ISO 306/B120	146 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414L WH9E515
Bending modulus	--5	ISO 178	2110 Mpa
Bending modulus		50.0 mm Span4	ASTM D790	2050 Mpa
bending strength	Yield, 50.0 mm Span4	ASTM D790	86.0 Mpa
bending strength		--5,6	ISO 178	83.0 Mpa
elongation	Yield	ISO 527-2/50	5.0 %
		Yield3	ASTM D638	5.0 %
		Break3	ASTM D638	84 %
		Break	ISO 527-2/50	75 %
Tensile modulus	--2	ASTM D638	2030 Mpa
Tensile modulus		--	ISO 527-2/1	2000 Mpa
tensile strength	Yield	ISO 527-2/50	52.0 Mpa
		Break	ISO 527-2/50	47.0 Mpa
		Break3	ASTM D638	54.0 Mpa
		Yield3	ASTM D638	52.0 Mpa

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414L WH9E515
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	11 g/10 min
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	10.0 cm3/10min
Shrinkage rate	3.20 mm，Flow	Internal Method	0.40 - 0.80 %
Water absorption rate	Saturation, 23°C	ISO 62	0.17 %
Water absorption rate		Equilibrium, 23°C, 50% RH	ISO 62	0.070 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414L WH9E515
Dart impact	23°C, Total Energy	ASTM D3763	68.0 J

flammability	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414L WH9E515
UL flame retardant rating	0.40 mm	UL 94	HB

injection	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414L WH9E515
drying temperature			120 °C
drying time			3.0 to 4.0 hr
Hopper temperature			60 to 80 °C
Mold temperature			70 to 95 °C
Processing (melt) temperature			295 to 315 °C
Spray nozzle temperature			290 to 310 °C
Suggested maximum moisture content			0.020 %
Temperature at the front of the material cylinder			295 to 315 °C
Temperature at the rear of the barrel			260 to 280 °C
Temperature in the middle of the barrel			280 to 305 °C

Get App

Top