Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 LV-5H EMS-CHEMIE USA
Grilamid®
Electrical applications、chip、Shell
Low temperature impact re、gas barrier
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | EMS-CHEMIE USA/LV-5H |
|---|---|---|---|
| Impact strength of simply supported beam gap | -30℃ -30°C | ISO 179/1eA | 15 kJ/m² |
| 23℃ 23°C | ISO 179/1eA | 19 kJ/m² | |
| Impact strength of simply supported beam without notch | -30℃ -30°C | ISO 179/1eU | 90 kJ/m² |
| 23℃ 23°C | ISO 179/1eU | 90 kJ/m² |
| Electrical performance | Test Condition | Test Method | EMS-CHEMIE USA/LV-5H |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | -- KV/mm | |
| Volume resistivity | IEC 60093 | -- ohms·cm | |
| Surface resistivity | IEC 60093 | -- ohms | |
| Compared to the leakage trace index | IEC 60112 | -- V |
| Mechanical properties | Test Condition | Test Method | EMS-CHEMIE USA/LV-5H |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 12000 Mpa | |
| Tensile strength | 断裂 断裂 | ISO 527-2 | 155 Mpa |
| Shore hardness | 邵氏 D，15 秒 邵氏 D，15 秒 | ISO 868 | -- |
| Tensile strain, tensile strain | 断裂 断裂 | ISO 527-2 | 5 % |
| ISO 2039-1 | -- Mpa |
| Flame retardant performance | Test Condition | Test Method | EMS-CHEMIE USA/LV-5H |
|---|---|---|---|
| Flammability level | 0.8 mm 0.8 mm | IEC 60695-11-10, -20 | HB |
| physical property | Test Condition | Test Method | EMS-CHEMIE USA/LV-5H |
|---|---|---|---|
| Shrinkage rate | TD Across Flow | ISO 294-4 | 0.5 % |
| MD Flow | ISO 294-4 | 0.1 % | |
| Water absorption rate | 饱和，23℃ Saturation, 73°F | ISO 62 | 0.8 % |
| Density | ISO 1183 | 1.47 g/cm³ | |
| Water absorption rate | 平衡，23℃，50% RH Equilibrium, 73°F, 50% RH | ISO 62 | 0.4 % |
| Thermal performance | Test Condition | Test Method | EMS-CHEMIE USA/LV-5H |
|---|---|---|---|
| Continuous use temperature | -- -- 4 4 | 内部方法 | 150 °C |
| -- -- 3 3 | ISO 2578 | 90.0 到 120 °C | |
| ISO 11357-3 | 178 °C | ||
| TD Transverse | ISO 11359-2 | 0.00012 1/℃ | |
| MD 流动 | ISO 11359-2 | 0.000015 1/℃ |
Contact Us
Get App
Top