Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPE Witcom TPE 2006/562 Witcom Engineering Plastics B.V.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom TPE 2006/562 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| Impact strength of cantilever beam gap | ISO 180/1A | >60 kJ/m² |
| hardness | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom TPE 2006/562 |
|---|---|---|---|
| Shore hardness | 邵氏A | 85 |
| Mechanical properties | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom TPE 2006/562 |
|---|---|---|---|
| Tensile strain | 断裂 | ISO 527-2 | >80 % |
| tensile strength | 屈服 | ISO 527-2 | <8.00 MPa |
| Flexural modulus | ISO 178 | 200 MPa | |
| bending strength | ISO 178 | 15.0 MPa |
| Electrical performance | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom TPE 2006/562 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 1.0E+4到1.0E+6 ohms·cm | |
| Surface Resistivity | ASTM D257 | 1.0E+3到1.0E+4 ohms |
| flammability | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom TPE 2006/562 |
|---|---|---|---|
| UL flame retardant rating | 3.0mm | ISO 1210 | HB |
| physical property | Test Condition | Test Method | Witcom Engineering Plastics B.V./Witcom TPE 2006/562 |
|---|---|---|---|
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.30 % |
| 饱和,23°C | ISO 62 | 1.0 % | |
| density | ISO 1183 | 1.06 g/cm³ | |
| Shrinkage rate | MD：3.00mm | ISO 2577 | 0.60to1.2 % |
Contact Us
Get App
Top