Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM 5010 BK ASAHI JAPAN
TENAC™
Electrical applications、Household daily necessiti、Shell、currency、Engine parts、Engineering accessories
High impact resistance、Medium viscosity
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodASAHI JAPAN/5010 BK
Rockwell hardnessM级ASTM D78594
R级ASTM D785120
Mechanical propertiesTest ConditionTest MethodASAHI JAPAN/5010 BK
Taber abraserASTM D104413.0 mg
Tensile modulusISO 527-23300 Mpa
elongation断裂ASTMD63830 %
tensile strength --ASTM D63872.0 Mpa
bending strengthASTM D790107 Mpa
Flexural modulus--ISO 1783100 Mpa
tensile strength 屈服ISO 527-272.0 Mpa
Flexural modulus--ASTM D7903040 Mpa
Electrical performanceTest ConditionTest MethodASAHI JAPAN/5010 BK
dielectric constant23°C,1MHzASTM D1503.80
Surface ResistivityASTM D2571.0E+16-1.0E+17 ohms
Volume resistivity23°CASTM D2571.0E+15-1.0E+16 ohms·cm
Dissipation Factor23°C,1MHzASTM D1507E-03
dielectric strengthASTM D14918 KV/mm
arc resistanceASTM D495250 sec
flammabilityTest ConditionTest MethodASAHI JAPAN/5010 BK
UL flame retardant rating1.5mmUL 94HB
physical property Test ConditionTest MethodASAHI JAPAN/5010 BK
Shrinkage rateMD内部方法1.8-2.2 %
melt mass-flow rate190°C/2.16kgISO 113322 g/10min
Water absorption rate23°C,24hr,50%RHASTM D5700.20 %
Thermal performanceTest ConditionTest MethodASAHI JAPAN/5010 BK
Heat distortion temperature1.8MPa,未退火，HDTASTM D648136 °C
0.45MPa,未退火，HDTASTM D648172 °C
thermal conductivity0.23 W/m/K
Heat distortion temperature0.45MPa,未退火，HDTISO 75-2/B165 °C
1.8MPa,未退火，HDTISO 75-2/A105 °C
specific heat1470 J/kg/°C
Linear coefficient of thermal expansionMDASTMD6961E-04 cm/cm/°C

Contact Us

Get App

Top