Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS 138 Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/138 |
|---|---|---|---|
| melt mass-flow rate | 230℃,3.8kg | ASTM D-1238 | 6.0 g/10min |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/138 |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 46.2 MPa |
| Impact strength of cantilever beam gap | 23℃,3.18mm | ASTM D-256 | 165 J/m |
| Rockwell hardness | ASTM D-785 | 112 R scale | |
| Impact strength of cantilever beam gap | -40℃,3.18mm | ASTM D-256 | 48.0 J/m |
| Tensile modulus | ASTM D-638 | 2650 MPa | |
| bending strength | 屈服 | ASTM D-790 | 75.2 MPa |
| Flexural modulus | ASTM D-790 | 2690 MPa |
| physical property | Test Condition | Test Method | Ineos ABS/138 |
|---|---|---|---|
| density | ASTM D-792 | 1.06 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.40-0.60 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/138 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa，未退火，12.7mm，HDT | ASTM D-648 | 78.9 ℃ |
| 0.45MPa，退火，12.7mm，HDT | ASTM D-648 | 100 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000081 cm/cm℃ | |
| Heat distortion temperature | 1.80MPa，退火，12.7mm，HDT | ASTM D-648 | 96.7 ℃ |
| vicat | ASTM D-1525 | 107 ℃ | |
| Heat distortion temperature | 0.45MPa，未退火，12.7mm，HDT | ASTM D-648 | 93.3 ℃ |
| combustibility | 1.45mm | UL 94 | HB |
| 3.05mm | UL 94 | HB |
Contact Us
Get App
Top