Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Copolymer NEFTEKHIM PP 4210G (EP2S30B) Nizhnekamskneftekhim Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Nizhnekamskneftekhim Inc./NEFTEKHIM PP 4210G (EP2S30B) |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 90 J/m |
| hardness | Test Condition | Test Method | Nizhnekamskneftekhim Inc./NEFTEKHIM PP 4210G (EP2S30B) |
|---|---|---|---|
| Rockwell hardness | R级 | 75to82 |
| Supplementary Information | Test Condition | Test Method | Nizhnekamskneftekhim Inc./NEFTEKHIM PP 4210G (EP2S30B) |
|---|---|---|---|
| ThermalCreepTemperature | 70to80 °C | ||
| Thermal-oxidativeDeterioration | 150°C | 20.8 day |
| Mechanical properties | Test Condition | Test Method | Nizhnekamskneftekhim Inc./NEFTEKHIM PP 4210G (EP2S30B) |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 11 % |
| Flexural modulus | ASTM D790 | 900 MPa | |
| tensile strength | 屈服 | ASTM D638 | 26.0 MPa |
| physical property | Test Condition | Test Method | Nizhnekamskneftekhim Inc./NEFTEKHIM PP 4210G (EP2S30B) |
|---|---|---|---|
| Apparent density | 0.48to0.60 g/cm³ | ||
| gel content | >2.50mm | 0.00 pcs/m² | |
| density | 0.900 g/cm³ | ||
| ash content | 0.025to0.050 % | ||
| gel content | >200.0µm | 300 pcs/m² | |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 1.5to2.0 g/10min |
| gel content | 0.700到1.50mm | 3.00 pcs/m² | |
| 1.50到2.50mm | 0.00 pcs/m² |
| Thermal performance | Test Condition | Test Method | Nizhnekamskneftekhim Inc./NEFTEKHIM PP 4210G (EP2S30B) |
|---|---|---|---|
| vicat | 130to138 °C |
Contact Us
Get App
Top