Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM LT802 ASAHI JAPAN
TENAC™
Engine parts,Household goods,Engineering accessories,Shell
Low friction coefficient,Homopolymer,wear resistant,Lubricity,Anti creep,high viscosity
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | ASAHI JAPAN/LT802 |
---|---|---|---|
Combustibility (rate) | UL 94 | HB | |
Hot deformation temperature | HDT | ASTM D648/ISO 75 | 125 ℃(℉) |
0.45MPa | ASTM D648 | 172 °C | |
1.82MPa | ASTM D648 | 125 °C | |
Linear coefficient of thermal expansion | TMA法 | 10 | |
ASTM D696/ISO 11359 | 10 mm/mm.℃ | ||
melt mass-flow rate | ASTM D1238 | 1.7 g/10min | |
UL flame retardant rating | UL 94 | HB |
mechanical properties | Test Condition | Test Method | ASAHI JAPAN/LT802 |
---|---|---|---|
Bending modulus | ASTM D790 | 2650 Mpa | |
ASTM D790/ISO 178 | 2650 kg/cm²(MPa)[Lb/in²] | ||
bending strength | ASTM D790/ISO 178 | 91 kg/cm²(MPa)[Lb/in²] | |
ASTM D790 | 91 Mpa | ||
elongation | ASTM D638/ISO 527 | 80 % | |
Elongation at Break | ASTM D638 | 80 % | |
Impact strength of cantilever beam gap | ASTM D256 | 118 J/m | |
Rockwell hardness | - | ASTM D785 | 120 R |
ASTM D785 | 92 | ||
- | ASTM D785 | 92 M | |
tensile strength | ASTM D638/ISO 527 | 64 kg/cm²(MPa)[Lb/in²] | |
ASTM D638 | 64 Mpa | ||
Wear resistance | ASTM D1044 | 13 |
other | Test Condition | Test Method | ASAHI JAPAN/LT802 |
---|---|---|---|
characteristic | 对金属有优异的耐摩擦和耐耗 |
Physical properties | Test Condition | Test Method | ASAHI JAPAN/LT802 |
---|---|---|---|
density | ASTM D792/ISO 1183 | 1.42 | |
melt mass-flow rate | ASTM D1238/ISO 1133 | 1.7 g/10min | |
Shrinkage rate | Across Flow | 旭化成法 | 1.8-2.2 % |
Flow | 旭化成法 | 1.8-2.2 % | |
Water absorption rate | ASTM D570 | 0.2 % | |
ASTM D570/ISO 62 | 0.2 % |