Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA11/TPE 30R51 SA 01 ARKEMA USA
Pebax®Rnew®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| Supporting hardness | 邵氏 D, 15 秒 | ISO 7619-1 | 30 |
| Mechanical properties | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | -- Mpa | |
| Tensile stress | 断裂 | ISO 527-2 | 16.0 Mpa |
| Tensile strain | 断裂 | ISO 527-2 | > 300 % |
| Tensile stress | 50% 应变 | ISO 527-2 | -- Mpa |
| Electrical performance | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1.0E+10 ohms·cm | |
| Surface Resistivity | IEC 60093 | -- ohms | |
| Volume resistivity | Renewable Carbon Conent | CSA LISTED | 41 % |
| squeeze out | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| drying temperature | 65 到 75 °C | ||
| drying time | 4.0 到 6.0 hr | ||
| Melt Temperature | 210 到 230 °C |
| physical property | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 2.5 % |
| 饱和, 23°C | ISO 62 | 20 % |
| Thermal performance | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| Melting temperature 2 | ISO 11357-3 | 150 °C |
| injection | Test Condition | Test Method | ARKEMA USA/30R51 SA 01 |
|---|---|---|---|
| Temperature | 25 到 60 °C | ||
| Processing (melt) temperature | 200 到 270 °C | ||
| drying temperature | 65 到 75 °C | ||
| drying time | 4.0 到 6.0 hr |
Contact Us
Get App
Top