Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PETG WS-501N JIANGYIN HUAHONG
--
Electrical applications
High toughness,High gloss
FDA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501N |
---|---|---|---|
Hot deformation temperature | 0.45MPa | ASTM D648 | 77 °C |
Melting temperature | / | ≥196±2 °C | |
melt mass-flow rate | ASTM D 1238-04 | 1.8 g/10min |
mechanical properties | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501N |
---|---|---|---|
Bending modulus | 1.27mm/min(3 inch/min) | ASTM D790 | 21200 Kgf/cm2 |
bending strength | 1.27mm/min(2 inch/min) | ASTM D790 | 680 Kgf/cm2 |
Dart impact | Low temperature | ASTM D358 | 829 g |
Normal temperature | ASTM D358 | 1803 g | |
elongation | @Yield 50mm/min(2 inch/min) | ASTM D638 | 5 % |
@Break 50mm/min(2 inch/min) | ASTM D638 | 165 % | |
Izod Notched Impact Strength | 23°C | ASTM D256 | 102 J/m |
Rockwell hardness | R-Scale | 117 °C | |
tensile strength | @Yield 50mm/min(2 inch/min) | ASTM D638 | 508 Kgf/cm2 |
@Break 50mm/min(2 inch/min) | ASTM D638 | 292 Kgf/cm2 |
flame retardant performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501N |
---|---|---|---|
UL flame retardant rating | 3.00mm | UL 94 | V-2 |
1.50mm | UL 94 | HB | |
1.00mm | UL 94 | HB |
Electrical performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501N |
---|---|---|---|
Dielectric constant | 1 kHz | ASTM D150 | 2.6 – |
1 MHz | ASTM D150 | 2.4 – | |
Dielectric loss | 1 MHz | ASTM D150 | 0.023 – |
1 kHz | ASTM D150 | 0.005 – | |
Dielectric strength | (short time,500V/sec) | ASTM D149 | 16 kV·mm |
Surface resistivity | ASTM D257 | 10^16 Ohm | |
Volume resistivity | ASTM D257 | 10^15 ohm·cm |
Physical properties | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501N |
---|---|---|---|
proportion | ASTM D792 | 1.29 kg/cm3 | |
viscosity | Ubbelodhe viscometer | 0.780±0.015 dl/g | |
Water absorption rate | ASTM D570 | 0.12 % |
optical performance | Test Condition | Test Method | JIANGYIN HUAHONG/WS-501N |
---|---|---|---|
Refractive index | ASDM D542 | 1.56 | |
Transmittance rate | ASDM D541 | 90 % | |
turbidity | / | < 1.0 % |