Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PEI 2200R SABIC INNOVATIVE US
ULTEM™
Electronic and electrical accessories
Glass fiber reinforced,Food contact compliance,Creep resistance
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Basic Performance | Test Condition | Test Method | SABIC INNOVATIVE US/2200R |
---|---|---|---|
melt mass-flow rate | ASTM D-1238 | 5.6 g/10min | |
Water absorption rate | 24hr,73℉ | ASTM D-570 | 0.190 % |
Equilibrium,73℉ | ASTM D-570 | 1.10 % |
thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/2200R |
---|---|---|---|
Combustibility | UL 94 | V-0 CLASS | |
Heat index | 机械冲击性能 | UL 746B | 170 °C |
电性能 | UL 746B | 170 °C | |
非机械性能 | UL 746B | 170 °C | |
Hot deformation temperature | 264Psi | ASTM D-648 | 408 ℉ |
66Psi | ASTM D-648 | 410 ℉ | |
Linear coefficient of thermal expansion | xflow | ASTM E-831 | - E-5/in/in℉ |
flow | ASTM E-831 | 1×10 E-5/in/in℉ | |
Vicat softening temperature | ASTM D-1525 | 428 ℉ |
mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/2200R |
---|---|---|---|
Bending modulus | ASTM D-790 | 809000 psi | |
bending strength | Yield | ASTM D-790 | 28700 psi |
Elongation at Break | ASTM D-638 | 3.0 % | |
Impact strength of cantilever beam gap | ASTM D-256 | 9.0 ft-lb/in | |
Rockwell hardness | ASTM D-785 | 114 psi | |
Suspended wall beam without notch impact strength | ASTM D-4812 | 1.6 ft-lb/in | |
tensile strength | Yield | ASTM D-638 | 20100 psi |
Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/2200R |
---|---|---|---|
Dielectric constant | 1KHz | ASTM D-150 | 3.50 |
Dielectric strength | 62mils | ASTM D-149 | 670 v/mil |
Dissipation factor | 1KHz | ASTM D-150 | 0.0015 |
Volume resistivity | ASTM D-257 | 7×10 Ω.cm |
Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/2200R |
---|---|---|---|
density | ASTM D-792 | 1.42 | |
Shrinkage rate | ASTM D-955 | 3-5 in/inE-3 |