Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA11 BMNO P40 TLD ARKEMA FRANCE
Rilsan®
Electric wire、Cable Applications
Thermal stability、UV resistance、Plasticized、Photostability、Good demolding performanc
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ARKEMA FRANCE/BMNO P40 TLD |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | -- |
| 23°C | ISO 179/1eU | -- |
| Mechanical properties | Test Condition | Test Method | ARKEMA FRANCE/BMNO P40 TLD |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 405 Mpa | |
| elongation | 断裂 | ASTM D638 | 430 % |
| Nominal tensile fracture strain | ISO 527-2 | > 50 % | |
| Tensile strain | 屈服 | ISO 527-2 | 42 % |
| tensile strength | 屈服 | ISO 527-2 | 27.0 Mpa |
| Impact strength of cantilever beam gap | ASTM D256 | 320 J/m | |
| Flexural modulus | ASTM D790 | 338 Mpa | |
| Fracture tensile strength | 断裂 | ASTM D638 | 64.1 Mpa |
| Electrical performance | Test Condition | Test Method | ARKEMA FRANCE/BMNO P40 TLD |
|---|---|---|---|
| relative permittivity | 100 Hz | IEC 60250 | 10.0 |
| Dissipation Factor | 1 MHz | IEC 60250 | 0.096 |
| dielectric strength | IEC 60243-1 | -- KV/mm | |
| Volume resistivity | IEC 60093 | -- ohms·cm | |
| Dissipation Factor | 100 Hz | IEC 60250 | 0.18 |
| relative permittivity | 1 MHz | IEC 60250 | 4.00 |
| Surface Resistivity | IEC 60093 | -- ohms | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V |
| flammability | Test Condition | Test Method | ARKEMA FRANCE/BMNO P40 TLD |
|---|---|---|---|
| Flammability level | UL 94 | HB | |
| Limiting Oxygen Index | ISO 4589-2 | 22 % |
| physical property | Test Condition | Test Method | ARKEMA FRANCE/BMNO P40 TLD |
|---|---|---|---|
| Shore hardness | ASTM D785 | 78 | |
| Water absorption rate | 饱和 | ASTM D570 | 1.1 % |
| Melt volume flow rate | 235°C/2.16 kg | ISO 1133 | 11.0 cm3/10min |
| Water absorption rate | 饱和, 23°C | ISO 62 | 1.6 % |
| Thermal performance | Test Condition | Test Method | ARKEMA FRANCE/BMNO P40 TLD |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 182 °C | |
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ISO 75-2/B | 130 °C |
| 1.8MPa，HDT | QJ/CL.4.3.19 | 41.1 °C | |
| vicat | ISO 306/B50 | 140 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ISO 75-2/A | 45.0 °C |
| melting temperature | DSC | 186 °C | |
| Linear coefficient of thermal expansion | 流动 | ISO 11359-2 | 1.1E-4 cm/cm/°C |
Contact Us
Get App
Top