Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 201-15 STYRON US
CALIBRE™
heat-resisting、transparent、High impact resistance、Usage: Toy、Food containers、Packaging products、Sports equipment and baby
heat-resisting、transparent、High impact resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | STYRON US/201-15 |
|---|---|---|---|
| Water absorption rate | 24hr,23℃ | ASTM D-570 | 0.15 % |
| Limiting Oxygen Index (LOI) | ASTM D-2863 | 26 % |
| Basic performance | Test Condition | Test Method | STYRON US/201-15 |
|---|---|---|---|
| density | ASTM D-792 | 1200 kg/m | |
| Water absorption rate | 23℃，相对湿度50% | ASTM D-570 | 0.32 % |
| melt mass-flow rate | ASTM D-1238 | 15 g/10min |
| Mechanical properties | Test Condition | Test Method | STYRON US/201-15 |
|---|---|---|---|
| tensile strength | 屈服点 | ASTM D-638 | 60 Mpa |
| elongation | 断裂点 | ASTM D-638 | 150 % |
| Rockwell hardness | ASTM D-785 | 72 M标度 | |
| Tensile modulus | ASTM D-638 | 2340 Mpa | |
| tensile strength | 断裂点 | ASTM D-638 | 71 Mpa |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 未破裂 |
| Flexural modulus | ASTM D-790 | 2410 Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 850 J/m | |
| bending strength | ASTM D-790 | 96 Mpa | |
| elongation | 屈服点 | ASTM D-638 | 60 % |
| Dart impact | 总能量@23℃ | ASTM D-3763 | 87 J |
| Electrical performance | Test Condition | Test Method | STYRON US/201-15 |
|---|---|---|---|
| dielectric strength | 60Hz | ASTM D-149 | 17 KV/mm |
| Volume resistivity | 23℃ ,干 | ASTM D-257 | 2.0×10 Ω.cm |
| Glow wire combustion index (GWFI) | 2mm | IEC 695-2-1 | 850 °C |
| Dissipation Factor | 60Hz | ASTM D-150 | 0.001 |
| Compared to the Leakage Traceability Index (CTI) | 2mm | IEC 112 | 250 V |
| physical property | Test Condition | Test Method | STYRON US/201-15 |
|---|---|---|---|
| transmittance | ASTM D-1003 | 89 % | |
| Shrinkage rate | ASTM D-955 | 0.005-0.007 mm/mm | |
| Haze ratio | ASTM D-1003 | 0.7-1.5 % | |
| refractive index | ASTM D-542 | 1.586 |
| Thermal performance | Test Condition | Test Method | STYRON US/201-15 |
|---|---|---|---|
| Heat distortion temperature | 退火@1.82MPa(4 mm)，HDT | ASTM D-648 | 140 °C |
| Ball indentation temperature | IEC 598-1 | >125 °C | |
| Heat distortion temperature | 退火@0.45MPa(4 mm)，HDT | ASTM D-648 | 143 °C |
| Shrinkage rate | 40℃-82℃ | ASTM D-696 | 68×10 mm/mm/℃ |
| Heat distortion temperature | 未退火@1.82MPa(4 mm)，HDT | ASTM D-648 | 127 °C |
| Average degree of combustion | ASTM D-635 | 25 mm | |
| vicat | 50 C/hour | ASTM D-1525 | 148 °C |
Contact Us
Get App
Top