Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC GSH2010KR 9001 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Automotive Applications,electrical equipment
Glass fiber reinforced,Filler: Glass fiber reinf,10% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GSH2010KR 9001 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 139 °C |
1.8MPa,Unannealed | ISO 75-2/A | 134 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 6.7E-05 cm/cm/°C |
MD | ISO 11359-2 | 4E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GSH2010KR 9001 |
---|---|---|---|
Bending modulus | ISO 178 | 3500 Mpa | |
bending strength | ISO 178 | 120 Mpa | |
Tensile modulus | ISO 527-2 | 4200 Mpa | |
Tensile strain | Break | ISO 527-2 | 3.4 % |
tensile strength | Break | ISO 527-2 | 75.0 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GSH2010KR 9001 |
---|---|---|---|
Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GSH2010KR 9001 |
---|---|---|---|
melt mass-flow rate | 300°C/1.2kg | ISO 1133 | 12 g/10min |
Melt Volume Flow Rate (MVR) | 300°C/1.2kg | ISO 1133 | 11.0 cm3/10min |
Shrinkage rate | 吸水率(Saturation,23°C) | 0.14 % | |
MD:3.20mm | 0.30-0.50 % | ||
TD:3.20mm | 0.40-0.60 % |
impact performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GSH2010KR 9001 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 68 kJ/m² |
flammability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/GSH2010KR 9001 |
---|---|---|---|
UL flame retardant rating | 0.40mm | UL 94 | HB |