Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Copolymer Prime PP PO 500 Primex Plastics Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Primex Plastics Corporation/Prime PP PO 500 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -40°C | ASTM D256 | 无断裂 |
| 23°C | ASTM D256 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Primex Plastics Corporation/Prime PP PO 500 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 280 % |
| Flexural modulus | ASTM D790 | 1240 MPa |
| physical property | Test Condition | Test Method | Primex Plastics Corporation/Prime PP PO 500 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.2to1.8 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 0.35 g/10min |
| density | ASTM D792 | 0.918 g/cm³ |
| Thermal performance | Test Condition | Test Method | Primex Plastics Corporation/Prime PP PO 500 |
|---|---|---|---|
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 70.6 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.4E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,退火，HDT | ASTM D648 | 91.7 °C |
Contact Us
Get App
Top