Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC 241-YW8C033 SABIC INNOVATIVE NANSHA
LEXAN™
parts
Low viscosity, Generally used for injec,Low viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic Performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/241-YW8C033 |
|---|---|---|---|
| Water absorption rate | 23,24时间 | ASTM D-570 | 0.15 % |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/241-YW8C033 |
|---|---|---|---|
| Hot deformation temperature | 1.82MPa | ASTM D-648 | 132 °C |
| Linear coefficient of thermal expansion | -30-+30 | TMA | 7 1×E-5/K |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/241-YW8C033 |
|---|---|---|---|
| Bending modulus | 23 | ASTM D-790 | 2200 Mpa |
| bending strength | 23 | ASTM D-790 | 93.2 Mpa |
| Elongation at Break | 23 | GEPJ | 220 % |
| Impact strength of cantilever beam gap | 23 | ASTM D-256 | 764 J/m |
| Rockwell hardness | --- | ASTM D-785 | R123 --- |
| tensile strength | 23 | GEPJ | 62.8 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/241-YW8C033 |
|---|---|---|---|
| Dielectric constant | 60Hz | ASTM D-150 | 3.2 --- |
| Dissipation factor | 60Hz | ASTM D-150 | 0.0009 --- |
| Volume resistivity | 23 | ASTM D-257 | 1×E16 Ω |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/241-YW8C033 |
|---|---|---|---|
| Shrinkage rate | Flow | ASTM D-955 | 220 % |