Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

SPS SP2300 LG CHEM KOREA
LUSEP®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | LG CHEM KOREA/SP2300 |
---|---|---|---|
Hot deformation temperature | 0.45 MPa, Unannealed, 6.40 mm | ASTM D648 | 260 °C |
1.8 MPa, Unannealed, 6.40 mm | ASTM D648 | 220 °C |
mechanical properties | Test Condition | Test Method | LG CHEM KOREA/SP2300 |
---|---|---|---|
Bending modulus | 3.20 mm | ASTM D790 | 8830 Mpa |
bending strength | Yield, 3.20 mm | ASTM D790 | 177 Mpa |
elongation | Break, 3.20 mm | ASTM D638 | 2.0 % |
tensile strength | Break, 3.20 mm | ASTM D638 | 118 Mpa |
Electrical performance | Test Condition | Test Method | LG CHEM KOREA/SP2300 |
---|---|---|---|
Compared to the anti leakage trace index | Solution A | IEC 60112 | V |
Dielectric strength | 23°C, 1.00 mm | ASTM D149 | 35 KV/mm |
Physical properties | Test Condition | Test Method | LG CHEM KOREA/SP2300 |
---|---|---|---|
Shrinkage rate | 3.20 mm,Flow | ASTM D955 | 0.30 - 0.90 % |
flammability | Test Condition | Test Method | LG CHEM KOREA/SP2300 |
---|---|---|---|
UL flame retardant rating | 3.0 mm | UL 94 | HB |
injection | Test Condition | Test Method | LG CHEM KOREA/SP2300 |
---|---|---|---|
drying temperature | 80 to 100 °C | ||
drying time | 3.0 to 5.0 hr | ||
Mold temperature | 80 to 150 °C | ||
Processing (melt) temperature | 280 to 310 °C | ||
Screw speed | 40 to 80 rpm | ||
Spray nozzle temperature | 280 to 310 °C | ||
Suggested maximum moisture content | 0.020 % | ||
Temperature at the front of the material cylinder | 290 to 310 °C | ||
Temperature at the rear of the barrel | 270 to 290 °C | ||
Temperature in the middle of the barrel | 280 to 310 °C |