Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT 420-1001 SABIC INNOVATIVE NANSHA
VALOX™
Lawn equipment、Garden equipment、Industrial applications、Automotive External Parts、Electrical field、Electronic field、Architectural application、Outdoor applications、Electrical appliances、Engine hood parts、Medical supplies、Nursing supplies、Plastic bag、Automotive interior parts、Casters、Household goods、Petroleum Applications、Natural gas supplies、sporting goods、Textile application、Lighting applications
Glass fiber reinforced、dimensional stability 、High rigidity、high strength、heat-resisting
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 45 kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 5.0 kJ/m² |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 45 kJ/m² |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 8.00 J |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 5.0 kJ/m² |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 7.0 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 45 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 8.0 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 45 kJ/m² |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| Rockwell hardness | R级 | ISO 2039-2 | 118 |
| ball-indentation hardness | H358/30 | ISO 2039-1 | 122 Mpa |
| Rockwell hardness | R级 | ASTM D785 | 118 |
| Supplementary Information | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| filler | ASTM D229 | 30 % |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 9300 Mpa | |
| tensile strength | Yield | ASTM D638 | 120 Mpa |
| 断裂 | ISO 527-2/5 | 125 Mpa | |
| Tensile strain | 屈服 | ISO 527-2/5 | 2.0 % |
| bending strength | Break,50.0mmSpan | ASTM D790 | 190 Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17转轮 | ASTM D1044 | 19.0 mg |
| Flexural modulus | 50.0mmSpan | ASTM D790 | 7580 Mpa |
| Tensile strain | Break | ASTM D638 | 2.7 % |
| tensile strength | 屈服 | ISO 527-2/5 | 125 Mpa |
| Tensile modulus | ASTM D638 | 9300 Mpa | |
| bending strength | Yield,50.0mmSpan | ASTM D790 | 195 Mpa |
| tensile strength | Break | ASTM D638 | 120 Mpa |
| Tensile strain | Yield | ASTM D638 | 2.7 % |
| bending strength | ISO 178 | 195 Mpa | |
| Flexural modulus | ISO 178 | 8500 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/5 | 2.0 % |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| relative permittivity | 60Hz | IEC 60250 | 3.10 |
| dielectric strength | 0.800mm,在油中 | IEC 60243-1 | 28 KV/mm |
| relative permittivity | 50Hz | IEC 60250 | 3.10 |
| Volume resistivity | ASTM D257 | >3.2E+16 ohms·cm | |
| Dissipation Factor | 100Hz | ASTM D150 | 2E-03 |
| 1MHz | ASTM D150 | 0.020 | |
| 100Hz | IEC 60250 | 1E-03 | |
| dielectric constant | 1MHz | ASTM D150 | 3.70 |
| dielectric strength | 3.20mm,在油中 | IEC 60243-1 | 16 KV/mm |
| relative permittivity | 1MHz | IEC 60250 | 3.10 |
| dielectric constant | 100Hz | ASTM D150 | 3.80 |
| Dissipation Factor | 1MHz | IEC 60250 | 0.010 |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V | |
| Dissipation Factor | 60Hz | IEC 60250 | 1E-03 |
| 50Hz | IEC 60250 | 1E-03 | |
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL 746 | PLC 1 |
| Volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| dielectric strength | 1.00mm15 | IEC 60243-1 | 19 KV/mm |
| arc resistance | ASTM D495 | PLC 5 | |
| dielectric strength | 1.60mm,在油中 | IEC 60243-1 | 24 KV/mm |
| 3.20mm,inAir | ASTM D149 | 19 KV/mm | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| dielectric strength | 1.60mm,在油中 | ASTM D149 | 25 KV/mm |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL 746 | PLC 0 |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 750 °C |
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| Limiting Oxygen Index | ASTM D2863 | 19 % |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.30-0.80 % |
| melt mass-flow rate | 250°C/2.16kg | ISO 1133 | 17 g/10min |
| Water absorption rate | 24hr | ASTM D570 | 0.090 % |
| 平衡,23°C,50%RH | ISO 62 | 0.080 % | |
| Shrinkage rate | TD：3.20mm | 内部方法 | 0.50-1.0 % |
| MD：--2 | 内部方法 | 0.30-0.70 % | |
| MD：--3 | 内部方法 | 0.30-0.50 % | |
| MD：--4 | 内部方法 | 0.50-0.80 % | |
| Melt volume flow rate | 250°C/2.16kg | ISO 1133 | 13.0 cm3/10min |
| Shrinkage rate | TD：--2 | 内部方法 | 0.50-1.0 % |
| TD：--3 | 内部方法 | 0.40-0.60 % | |
| TD：--5 | 内部方法 | 0.60-0.90 % | |
| Specific volume | ASTM D792 | 0.660 cm³/g |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE NANSHA/420-1001 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,6.40mm，HDT | ASTM D648 | 207 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ISO 11359-2 | 1.2E-04 cm/cm/°C |
| MD：60to138°C | ASTME831 | 2.5E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm，HDT | ASTM D648 | 220 °C |
| Linear coefficient of thermal expansion | MD：-40到40°C | ISO 11359-2 | 2.5E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,6.40mm，HDT | ASTM D648 | 216 °C |
| RTI Str | UL 746 | 140 °C | |
| Heat distortion temperature | 0.45MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Bf | 217 °C |
| thermal conductivity | ISO 8302 | 0.19 W/m/K | |
| vicat | -- | ISO 306/B120 | 215 °C |
| Linear coefficient of thermal expansion | TD：-40到40°C | ASTME831 | 1.2E-04 cm/cm/°C |
| vicat | -- | ISO 306/A50 | 223 °C |
| ASTM D152514 | 215 °C | ||
| -- | ISO 306/B50 | 215 °C | |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 2.5E-05 cm/cm/°C |
| RTI Imp | UL 746 | 140 °C | |
| Heat distortion temperature | 1.8MPa,Unannealed,64.0mmSpan，HDT | ISO 75-2/Af | 204 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 203 °C | |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
| RTI Elec | UL 746 | 140 °C |
Contact Us
Get App
Top