Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Elastomer, Specialty OLEFISTA™ QM4301E/QCM292 Mitsubishi Chemical Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| Shore hardness | ShoreA,10Sec | JISK7215 | 94 |
| thermal performance | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| Brittle temperature | JISK6723 | <-60.0 °C | |
| Hot deformation temperature | 120°C | JISK6723 | 5.0 % |
| Electrical performance | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| Volume resistivity | 30°C | JISK6723 | 8E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| density | JISK7112 | 1.45 g/cm³ |
| flammability | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| Extreme Oxygen Index | JISK7201 | 27 % | |
| UL flame retardant rating | 1.0mm | UL 94 | V-2 |
| elastomer | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| elongation | Break | JISK7113 | 380 % |
| tensile strength | Break | JISK7113 | 14.0 MPa |
| 100%Strain | JISK7113 | 9.00 MPa |
| aging | Test Condition | Test Method | Mitsubishi Chemical Corporation/OLEFISTA™ QM4301E/QCM292 |
|---|---|---|---|
| Change rate of tensile strength in air | 180°C,168hr | JISK7113 | 91 % |
| Tensile stress change rate | 180°C,168hr,Break | JISK7113 | 82 % |