Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPA 9950 NT 0000 SOLVAY USA
AMODEL®
Industrial applications,Automotive Applications
High temperature resistan,Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 262 °C |
| 1.8 MPa, Unannealed | ISO 75-2/A | 254 °C | |
| Melting temperature | ASTM D3418 | 260 °C |
| mechanical properties | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| Bending modulus | ISO 178 | 15900 Mpa | |
| bending strength | 3.5% Strain | ISO 178 | 379 Mpa |
| Tensile modulus | ISO 527-2 | 18500 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.3 % |
| tensile strength | Yield | ISO 527-2 | 245 Mpa |
| Electrical performance | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| Dielectric constant | 2.40 GHz | ASTM D2520 | 4.15 |
| 1.00 GHz | ASTM D2520 | 4.15 | |
| Dissipation factor | 2.40 GHz | ASTM D2520 | 0.011 |
| 1.00 GHz | ASTM D2520 | 0.011 |
| Physical properties | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| Shrinkage rate | Flow | Internal Method | 0.13 % |
| 横向Flow | Internal Method | 0.32 % | |
| Water absorption rate | 24 hr, 23°C | ASTM D570 | 0.37 % |
| impact performance | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180 | 68 kJ/m² |
| flammability | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| 0.60 mm, All Colors | 0.60 mm, 所有颜色 | HB |
| injection | Test Condition | Test Method | SOLVAY USA/9950 NT 0000 |
|---|---|---|---|
| drying temperature | 80 °C | ||
| drying time | 4.0 to 12 hr | ||
| Mold temperature | 80 to 120 °C | ||
| Processing (melt) temperature | 285 to 305 °C | ||
| Suggested maximum moisture content | 0.090 % | ||
| Temperature at the front of the material cylinder | 280 °C | ||
| Temperature at the rear of the barrel | 250 °C |