Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT/ASA EU5300 LG GUANGZHOU
LUMAX® 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Mechanical propertiesTest ConditionTest MethodLG GUANGZHOU/EU5300
tensile strength 断裂, 23°C, 3.20 mm, 注塑ASTM D638123 Mpa
Flexural modulus23°C, 6.40 mm, 注塑ASTM D7908240 Mpa
bending strength23°C, 6.40 mm, 注塑ASTM D790177 Mpa
elongation断裂, 23°C, 3.20 mm, 注塑ASTM D6382.0 %
flammabilityTest ConditionTest MethodLG GUANGZHOU/EU5300
UL flame retardant rating1.6 mmUL 94HB
physical property Test ConditionTest MethodLG GUANGZHOU/EU5300
melt mass-flow rate250°C/2.16 kgASTM D123813 g/10 min
Shrinkage rate23°C, 注塑,FlowASTM D9550.30 - 0.50 %
Water absorption rate24 hr, 23°CASTM D5700.060 %
Thermal performanceTest ConditionTest MethodLG GUANGZHOU/EU5300
Heat distortion temperature1.8 MPa, 未退火, 6.40 mm, 注塑,HDTASTM D648195 °C
melting temperatureASTM D3418223 °C
injectionTest ConditionTest MethodLG GUANGZHOU/EU5300
drying time4.0 to 6.0 hr
Suggested maximum moisture content0.020 %
Temperature in the middle of the barrel240 to 260 °C
Temperature at the rear of the barrel240 to 260 °C
Processing (melt) temperature240 to 260 °C
drying temperature120 °C
Temperature at the front of the material cylinder245 to 265 °C
Temperature40 to 80 °C
Spray nozzle temperature245 to 265 °C

Contact Us

Get App

Top