Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC EMERGE™ PC/ABS 7100 Trinseo
--
Electrical and electronic application fields
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7100 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.20mm,注塑 | ASTM D256 | 480 J/m |
| -30°C,3.20mm,注塑 | ASTM D256 | 290 J/m |
| hardness | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7100 |
|---|---|---|---|
| Rockwell hardness | R级,3.20mm,注塑 | ASTM D785 | 112 |
| Mechanical properties | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7100 |
|---|---|---|---|
| elongation | 断裂,3.20mm,注塑 | ASTM D638 | 50 % |
| 屈服,3.20mm,注塑 | ASTM D638 | 4.0 % | |
| Tensile modulus | 3.20mm,注塑 | ASTM D638 | 2210 MPa |
| bending strength | 3.20mm,注塑 | ASTM D790 | 80.0 MPa |
| tensile strength | 屈服,3.20mm,注塑 | ASTM D638 | 50.3 MPa |
| Flexural modulus | 3.20mm,注塑 | ASTM D790 | 2340 MPa |
| flammability | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7100 |
|---|---|---|---|
| UL flame retardant rating | 1.0mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7100 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.50to0.70 % |
| melt mass-flow rate | 260°C/5.0kg | ASTM D1238 | 25 g/10min |
| 230°C/3.8kg | ASTM D1238 | 4.5 g/10min | |
| density | ASTM D792 | 1.11 g/cm³ |
| Thermal performance | Test Condition | Test Method | Trinseo/EMERGE™ PC/ABS 7100 |
|---|---|---|---|
| vicat | ASTM D15254 | 133 °C | |
| Heat distortion temperature | 0.45MPa,未退火,3.20mm,注塑，HDT | ASTM D648 | 116 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 7.6E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火,3.20mm,注塑，HDT | ASTM D648 | 95.0 °C |
Contact Us
Get App
Top