Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Polyolefin, Unspecified Macromeric® 0103-212a NT USA Saco Polymers
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| Shore hardness | 邵氏A,1秒 | ASTM D2240 | 90 |
| Mechanical properties | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 200 % |
| tensile strength | 断裂 | ASTM D638 | 13.8 MPa |
| Flexural modulus | ASTM D790 | 172 MPa |
| flammability | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| Smoke density | SmolderingMode | ASTME662 | 230 Ds |
| FlamingMode | ASTME662 | 30 Ds | |
| Limiting Oxygen Index | ASTM D2863 | 35 % |
| aging | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| Change rate of tensile strength in air | 121°C,336hr | ASTM D638 | 10 % |
| Change rate of ultimate elongation in air | 136°C,168hr | ASTM D638 | -25 % |
| Change rate of tensile strength in air | 136°C,168hr | ASTM D638 | 10 % |
| Change rate of ultimate elongation in air | 121°C,336hr | ASTM D638 | -25 % |
| physical property | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| melt mass-flow rate | 190°C/21.6kg | ASTM D1238 | 3.0 g/10min |
| Ash content ProcedureB | ASTM D5630 | 44 % | |
| density | ASTM D792 | 1.51 g/cm³ |
| elastomer | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| tear strength | 23°C | ASTM D470 | 56.0 kN/m |
| Thermal performance | Test Condition | Test Method | USA Saco Polymers/Macromeric® 0103-212a NT |
|---|---|---|---|
| brittle temperature | ASTM D746 | -30.0 °C | |
| UL temperature rating | UL 1581 | 90 °C | |
| deformation | 121°C | UL 1277 | 5.4 % |
Contact Us
Get App
Top