Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 D.BKV130 LANXESS GERMANY
Durethan®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LANXESS GERMANY/D.BKV130 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 70 kJ/m² |
| 23°C | ISO 180/1U | 80 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 90 kJ/m² |
| -30°C | ISO 179/1eU | 75 kJ/m² |
| Supplementary Information | Test Condition | Test Method | LANXESS GERMANY/D.BKV130 |
|---|---|---|---|
| ISO Shortcut | ISO 1874 | PA6-HI.GHR.14-090.GF30 |
| film | Test Condition | Test Method | LANXESS GERMANY/D.BKV130 |
|---|---|---|---|
| Thin film puncture strength | --7 | ISO 6603-2 | 4.30 J |
| --6 | ISO 6603-2 | 765 N | |
| --7 | ISO 6603-2 | 990 N | |
| --6 | ISO 6603-2 | 2.50 J |
| Mechanical properties | Test Condition | Test Method | LANXESS GERMANY/D.BKV130 |
|---|---|---|---|
| Tensile strain | 断裂,23°C | ISO 527-2/5 | 3.4 % |
| Flexural modulus | 23°C | ISO 178/A | 8600 Mpa |
| bending strength | 3.5%Strain | ISO 178/A | 240 Mpa |
| tensile strength | 断裂,23°C | ISO 527-2/5 | 160 Mpa |
| bending strength | 23°C | ISO 178 | 250 Mpa |
| Tensile modulus | 23°C | ISO 527-2/1 | 9300 Mpa |
| bending strength | FlexuralStrainatFlexuralStrength5(23°C) | 4.3 % |
| physical property | Test Condition | Test Method | LANXESS GERMANY/D.BKV130 |
|---|---|---|---|
| Shrinkage rate | TD:120°C,2hr,2.00mm3 | ISO 294-4 | 0.10 % |
| TD:280°C,2.00mm2 | ISO 294-4 | 0.80 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 2.0 % |
| 饱和,23°C | ISO 62 | 6.6 % | |
| Shrinkage rate | MD:280°C,2.00mm2 | ISO 294-4 | 0.30 % |
| MD:120°C,2hr,2.00mm3 | ISO 294-4 | 0.10 % |
| Thermal performance | Test Condition | Test Method | LANXESS GERMANY/D.BKV130 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 221 °C | |
| vicat | ISO 306/B120 | 212 °C | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 2E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 218 °C |
| Linear coefficient of thermal expansion | TD：23to55°C | ISO 11359-2 | 1E-04 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 202 °C |
Contact Us
Get App
Top