Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TSU-Ester InnoTuf® HP-1085A Innovative Polymers, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-1085A |
|---|---|---|---|
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ASTM D4060 | 8.00 mg |
| Uncured Properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-1085A |
|---|---|---|---|
| Viscosity | 固化时间5 | 1.8E+02 hr | |
| 60°C4 | 0.73 Pa·s | ||
| GelTime | 10to20 min | ||
| 38°C3 | 0.70 Pa·s | ||
| 60°C2 | 0.60 Pa·s |
| thermosetting | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-1085A |
|---|---|---|---|
| Thermosetting components | 脱模时间 | 60to180 min | |
| 硬化法 | 按重量计算的混合比:100按容量计算的混合比:100 | ||
| 树脂 | 按重量计算的混合比:72按容量计算的混合比:68 |
| Cured Properties | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-1085A |
|---|---|---|---|
| tear strength | ASTM D624 | 66.5 kN/m | |
| elongation | 断裂 | ASTM D638 | 800 % |
| tensile strength | ASTM D638 | 31.0 MPa | |
| Shore hardness | ShoreA | ASTM D2240 | 80to90 |
| physical property | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-1085A |
|---|---|---|---|
| density | Hardener | 1.13 g/cm³ | |
| 基体树脂 | 1.20 g/cm³ | ||
| Shrinkage rate | MD | ASTM D2566 | 1.0to1.5 % |
| elastomer | Test Condition | Test Method | Innovative Polymers, Inc./InnoTuf® HP-1085A |
|---|---|---|---|
| tear strength | 开裂 | ASTM D470 | 18 kN/m |
Contact Us
Get App
Top