Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 3200-2 EF2001 CELANESE USA
CELANEX®
Electrical applications,Automotive Applications
High toughness,Hydrolysis resistance,Thermal stability,Weather resistance,UV resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | CELANESE USA/3200-2 EF2001 |
|---|---|---|---|
| Extreme Oxygen Index | ISO 4589 | 20 % | |
| Glass transition temperature | ISO 11357-1 | 60 °C | |
| Hot deformation temperature | 0.45Mpa | ISO 75-1/-2 | 215 °C |
| 1.8Mpa | ISO 75-1/-2 | 195 °C | |
| 8.0Mpa | ISO 75-1/-2 | 90 °C | |
| Melting temperature | ISO 11357-1 | 225 °C | |
| UL flame retardant rating | UL 94 | HB | |
| Vicat softening temperature | ISO 306 | 215 °C |
| mechanical properties | Test Condition | Test Method | CELANESE USA/3200-2 EF2001 |
|---|---|---|---|
| Bending modulus | 23℃ | ISO 178 | 5200 Mpa |
| bending strength | 23℃ | ISO 178 | 150 Mpa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 5.5 KJ/m |
| -30℃ | ISO 179/1eU | 20 KJ/m | |
| -30℃ | ISO 179/1eA | 5 KJ/m | |
| 23℃ | ISO 179/1eU | 20 KJ/m | |
| Elongation at Break | 5mm/min | ISO 527-2/1A | 3.5 % |
| Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 5 KJ/m |
| Rockwell hardness | ISO 2039-2 | 90 M | |
| Tensile modulus | 1mm/min | ISO 527-2/1A | 5800 Mpa |
| tensile strength | 5mm/min | ISO 527-2/1A | 100 Mpa |
| Electrical performance | Test Condition | Test Method | CELANESE USA/3200-2 EF2001 |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | IEC 60112 | 350 | |
| Dielectric dissipation factor | 1MHz | IEC 60250 | 200 E-4 |
| 100Hz | IEC 60250 | 16 E-4 | |
| Dielectric strength | IEC 60243-1 | 29 KV/mm | |
| Surface resistivity | IEC 60093 | >1E15 Ohm | |
| Volume resistivity | 1MHz | IEC 60250 | 3.8 |
| 100Hz | IEC 60250 | 4.2 | |
| IEC 60093 | >1E13 ohm.m |
| Physical properties | Test Condition | Test Method | CELANESE USA/3200-2 EF2001 |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | ISO 1133 | 26 CM | |
| Shrinkage rate | Across Flow | ISO 294-4 | 0.5-0.7 % |
| Water absorption rate | 23℃,50%相对湿度 | ISO 62 | 0.2 % |
| 23℃,Saturation | ISO 62 | 0.45 % |