Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B3 GF 30 AKRO-PLASTIC GERMANY
AKROMID®
Engineering accessories、Automotive sector、engineering application 、engineering application
high strength、High rigidity、Glass fiber reinforced、enhance、Filler: Glass fiber reinf、30% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO179/1eU | 95 kJ/m² |
| -30°C | ISO179/1eU | 85 kJ/m² |
| Supplementary Information | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| ReinforcementContent | ISO1172 | 30 % |
| hardness | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| H961/30 | ISO2039-1 | 230 Mpa |
| Mechanical properties | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| Tensile stress | 断裂 | ISO527-2/5 | 185 Mpa |
| Tensile modulus | ISO527-2/1 | 10300 Mpa | |
| Tensile strain | 断裂 | ISO527-2/5 | 3.0 % |
| Bending stress | ISO178 | 270 Mpa | |
| Flexural modulus | ISO178 | 8500 Mpa |
| Electrical performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| Surface Resistivity | IEC60093 | 1E+12 ohms | |
| CTI | 解决方案A | IEC60112 | 600 V |
| Volume resistivity | IEC60093 | 1E+13 ohms·cm |
| flammability | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| Burning rate 6 | 1.00mm | FMVSS302 | <100 mm/min |
| FlameRating | 1.6mm | UL94 | HB |
| GlowWireFlammability Index | 1.6mm | IEC60695-2-12 | 650 °C |
| physical property | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| Shrinkage rate | TD | ISO294-4 | 0.80 % |
| Water absorption rate | 饱和,23°C | ISO62 | 6.3to6.9 % |
| SpiralFlow2.3 | 内部方法 | 66.0 CM | |
| HumidityAbsorption-62%RH | 70°C | ISO1110 | 2.1to2.3 % |
| Shrinkage rate | MD | ISO294-4 | 0.10 % |
| Thermal performance | Test Condition | Test Method | AKRO-PLASTIC GERMANY/B3 GF 30 |
|---|---|---|---|
| 0.45MPa,未退火 | ISO75-2/B | 220 °C | |
| 1.8MPa,未退火 | ISO75-2/A | 210 °C | |
| 8.0MPa,未退火 | ISO75-2/C | 150 °C | |
| TD：23to80°C | ISO11359-2 | 9.5E-05 cm/cm/°C | |
| TemperatureIndex | 50%LossofTensileStrength,5000hr | IEC216 | 160to175 °C |
| MD：23到80°C | ISO11359-2 | 1.6E-05 cm/cm/°C | |
| Melting temperature 5 | DINEN11357-1 | 220 °C | |
| TemperatureIndex | 50%LossofTensileStrength,20000hr | IEC216 | 130to150 °C |
Contact Us
Get App
Top