Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PAS RTP 1602 L RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 80 J/m |
Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 590 J/m |
hardness | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
Rockwell hardness | R级 | ASTM D785 | 121 |
Mechanical properties | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 3.6 % |
tensile strength | ASTM D638 | 124 MPa | |
compressive strength | ASTM D695 | 123 MPa | |
Flexural modulus | ASTM D790 | 5100 MPa | |
Tensile modulus | ASTM D638 | 5520 MPa | |
bending strength | ASTM D790 | 172 MPa |
Electrical performance | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
dielectric strength | ASTM D149 | 15 kV/mm | |
Dissipation Factor | 1MHz | ASTM D150 | 7E-03 |
dielectric constant | 1MHz | ASTM D150 | 3.80 |
arc resistance | ASTM D495 | 65.0 sec |
flammability | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |
physical property | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
Water absorption rate | 23°C,24hr | ASTM D570 | 0.40 % |
density | ASTM D792 | 1.47 g/cm³ | |
Shrinkage rate | MD:3.18mm | ASTM D955 | 0.30 % |
Thermal performance | Test Condition | Test Method | RTP US/RTP 1602 L |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 204 °C |
thermal conductivity | ASTMC177 | 0.29 W/m/K | |
Linear coefficient of thermal expansion | MD | ASTM D696 | 4E-05 cm/cm/°C |
Contact Us
Get App
Top