Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC K-30MRA KOTEC JAPAN
CARBO TEX
--
Good demolding performanc、Low viscosity
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | KOTEC JAPAN/K-30MRA |
|---|---|---|---|
| Flexural modulus | - | ASTM D790 | 2160 Mpa |
| tensile strength | - | ASTM D638 | 63 Mpa |
| bending strength | - | ASTM D790 | 85 Mpa |
| tensile strength | - | ASTM D638 | 640 Kgf/cm |
| Flexural modulus | - | ASTM D790 | 22000 Kgf/cm |
| IZOD impact strength | - | ASTM D256 | 80 Kgf.cm/cm |
| elongation | 断裂 | ASTM D638 | 120 % |
| bending strength | - | ASTM D790 | 12400 Ibf/in |
| IZOD impact strength | - | ASTM D256 | 780 J/m |
| - | ASTM D256 | 15 ft.ibf/in | |
| tensile strength | - | ASTM D638 | 9100 Ibf/in |
| bending strength | - | ASTM D790 | 870 Kgf/cm |
| Flexural modulus | - | ASTM D790 | 313000 Ibf/in |
| Electrical performance | Test Condition | Test Method | KOTEC JAPAN/K-30MRA |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 10 Ω.cm |
| Thermal performance | Test Condition | Test Method | KOTEC JAPAN/K-30MRA |
|---|---|---|---|
| -，18.6kg/cm | ASTM D648 | 133 °C | |
| melt mass-flow rate | 300℃,1.2kg | ASTM D1238 | 15 g/10min |
| -，18.6kg/cm | ASTM D648 | 271 ℉ | |
| heat resistance | ASTM D257 | V-2 |
Contact Us
Get App
Top