Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

TPV 8201-90 CELANESE USA

Santoprene™

Kitchen utensils,Home appliance components,Fatigue relief supplies,Soft handle,Smart phone,Monitor,Fatigue relief supplies,Phone,Home appliance components,Monitor,Kitchen utensils,Soft handle

Low friction coefficient,Low mold expansion,Recyclable materials,Controllable mold expansi,Cleanable,Good melt strength,Good colorability,Ozone resistance,Chemical resistance,Low water absorption,Not absorbing water

Plastic Datasheets

hardness	Test Condition	Test Method	CELANESE USA/8201-90
Shore hardness	ShoreA,15Sec,23°C	ISO 868	94

thermal performance	Test Condition	Test Method	CELANESE USA/8201-90
Brittle temperature		ISO 812	-54.0 °C
Brittle temperature			ASTM D746	-54.0 °C
RTI Elec		UL 746	100 °C
RTI Str	3.0mm	UL 746	95.0 °C
		1.1mm	UL 746	90.0 °C
		1.6mm	UL 746	95.0 °C

Electrical performance	Test Condition	Test Method	CELANESE USA/8201-90
Compared to the anti leakage trace index	CTI	UL 746	PLC 0
High arc combustion index	HAI	UL 746	PLC 0
High voltage arc tracing rate	PLC	UL 746
Hot wire ignition	1.6mm	UL 746	PLC 3
Hot wire ignition		3.0mm	UL 746	PLC 2

flammability	Test Condition	Test Method	CELANESE USA/8201-90
UL flame retardant rating	3.0mm	UL 94	HB
		1.1mm	UL 94	HB
		1.6mm	UL 94	HB

aging	Test Condition	Test Method	CELANESE USA/8201-90
Change rate of hardness (Shore) in the air	ShoreA,23°C,168hr,inSulfuricAcid,98%	ASTM D471	2.0
		ShoreA,23°C,168hr,inSodiumChloride,15%	ASTM D471	0.0
		ShoreA,23°C,168hr,inWater	ASTM D471	-1.0
		ShoreA,23°C,168hr,inIRM903Oil	ASTM D471	-5.0
		ShoreA,23°C,168hr,inSodiumHydroxide,50%	ASTM D471	0.0
Change rate of tensile strength in air	23°C,168hr,在水中	ISO 1817	1.0 %
		23°C,168hr,inSulfuricAcid,98%	ISO 1817	4.0 %
		23°C,168hr,inSodiumHydroxide,50%	ISO 1817	-2.0 %
		23°C,168hr,inIRM903Oil	ISO 1817	-9.0 %
		23°C,168hr,inSodiumChloride,15%	ASTM D471	-1.0 %
		23°C,168hr,inSodiumHydroxide,50%	ASTM D471	-2.0 %
		23°C,168hr,inIRM903Oil	ASTM D471	-9.0 %
		23°C,168hr,在水中	ASTM D471	1.0 %
		150°C,168hr	ISO 188	1.0 %
		23°C,168hr,inSodiumChloride,15%	ISO 1817	-1.0 %
		150°C,168hr	ASTM D573	1.0 %
		23°C,168hr,inSulfuricAcid,98%	ASTM D471	4.0 %
Change rate of ultimate elongation in air	150°C,168hr	ASTM D573	-15 %
		23°C,168hr,inIRM903Oil	ASTM D471	2.0 %
		23°C,168hr,inSodiumHydroxide,50%	ASTM D471	0.0 %
		23°C,168hr,inSodiumChloride,15%	ASTM D471	-2.0 %
		23°C,168hr,inSulfuricAcid,98%	ASTM D471	6.0 %
		23°C,168hr,在水中	ASTM D471	17 %
Changes in air quality	150°C,168hr	ASTM D573	-7.0 %
Changes in air quality		150°C,168hr	ISO 188	-7.0 %
Hardness change rate in the air	ShoreA,150°C,168hr	ASTM D573	1.0
Quality change rate	23°C,168hr,inSulfuricAcid,98%	ASTM D471	1.0 %
		23.0°C,168hr,inIRM903Oil	ISO 1817	18 %
		23°C,168hr,inIRM903Oil	ASTM D471	18 %
		23°C,168hr,在水中	ASTM D471	-2.0 %
		23°C,168hr,inSodiumHydroxide,50%	ASTM D471	2.0 %
		23°C,168hr,inSodiumChloride,15%	ASTM D471	1.0 %
		23.0°C,168hr,inSodiumHydroxide,50%	ISO 1817	2.0 %
		23.0°C,168hr,inSulfuricAcid,98%	ISO 1817	1.0 %
		23.0°C,168hr,inSodiumChloride,15%	ISO 1817	1.0 %
		23.0°C,168hr,inWater	ISO 1817	-2.0 %
Shore hardness	ShoreA,23°C,168hr,inSodiumHydroxide,50%	ISO 1817	0.0
		ShoreA,23°C,168hr,inSulfuricAcid,98%	ISO 1817	2.0
		ShoreA,23°C,168hr,inSodiumChloride,15%	ISO 1817	0.0
		ShoreA,150°C,168hr	ISO 188	1.0
		ShoreA,23°C,168hr,inIRM903Oil	ISO 1817	-5.0
		ShoreA,23°C,168hr,inWater	ISO 1817	-1.0
Tensile stress change rate	23°C,168hr,inIRM903Oil，Break	ISO 1817	2.0 %
		23°C,168hr,在水中，Break	ISO 1817	17 %
		23°C,168hr,inSodiumChloride,15%，Break	ISO 1817	-2.0 %
		23°C,168hr,inSodiumHydroxide,50%，Break	ISO 1817	0.0 %
		23°C,168hr,inSulfuricAcid,98%，Break	ISO 1817	6.0 %

elastomer	Test Condition	Test Method	CELANESE USA/8201-90
elongation	Break,23°C，Across Flow	ISO 37	620 %
elongation		Break,23°C，Across Flow	ASTM D412	620 %
Permanent compression deformation	70°C,22hr	ISO 815	52 %
Permanent compression deformation		70°C,22hr	ASTM D395B	52 %
tear strength	23°C，横向Flow	ASTM D624	48.0 kN/m
tear strength		23°C，Across Flow (Across Flow)	ISO 34-1	48 kN/m
tensile strength	Break,23°C	ISO 37	13.0 Mpa
tensile strength		Break,23°C，横向Flow	ASTM D412	13.0 Mpa
Tensile stress	100%Strain,23°C，横向Flow	ASTM D412	7.10 Mpa
Tensile stress		100%Strain,23°C，横向Flow	ISO 37	7.10 Mpa

Get App

Top