Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA6T E630NW1 MITSUI CHEM JAPAN
ARLEN™
Electrical applications,Electronic and electrical components
Glass fiber reinforced,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | MITSUI CHEM JAPAN/E630NW1 |
---|---|---|---|
Rockwell hardness | M-Scale | ASTM D785 | 100 |
thermal performance | Test Condition | Test Method | MITSUI CHEM JAPAN/E630NW1 |
---|---|---|---|
Glass transition temperature | 95.0 °C | ||
Hot deformation temperature | 1.8 MPa, Unannealed | ASTM D648 | 310 °C |
Linear coefficient of thermal expansion | Flow | ASTM E831 | 1.6E-5 cm/cm/°C |
Across Flow | ASTM E831 | 6.8E-5 cm/cm/°C | |
Melting temperature | 320 °C |
mechanical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/E630NW1 |
---|---|---|---|
Bending modulus | ASTM D790 | 12500 Mpa | |
bending strength | ASTM D790 | 275 Mpa | |
elongation | Break | ASTM D638 | 6.0 % |
tensile strength | ASTM D638 | 210 Mpa |
Electrical performance | Test Condition | Test Method | MITSUI CHEM JAPAN/E630NW1 |
---|---|---|---|
Dielectric constant | 1 MHz | ASTM D150 | 3.90 |
Dielectric strength | ASTM D149 | 24 KV/mm | |
Dissipation factor | 1 MHz | ASTM D150 | 0.013 |
Volume resistivity | ASTM D257 | 1.0E+15 ohms·cm |
Physical properties | Test Condition | Test Method | MITSUI CHEM JAPAN/E630NW1 |
---|---|---|---|
Shrinkage rate | Across FlowFlow | ASTM D955 | 0.80 % |
Flow | ASTM D955 | 0.20 % | |
Water absorption rate | 24 hr, 23°C, 65%r.h | ASTM D570 | 2.1 % |
flammability | Test Condition | Test Method | MITSUI CHEM JAPAN/E630NW1 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |