Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS DP H603 Ineos ABS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | Ineos ABS/DP H603 |
|---|---|---|---|
| Melt volume flow rate | 220℃,10kg | ISO 1133 | 7.00 cm |
| density | ISO 1183 | 1040 kg/m |
| Electrical performance | Test Condition | Test Method | Ineos ABS/DP H603 |
|---|---|---|---|
| relative permittivity | 1000Hz | IEC 60250 | 3.00 |
| dielectric strength | IEC 60243-1 | 34 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.10 |
| Dielectric loss | 100Hz | IEC 60250 | 0.0050 |
| Volume resistivity | IEC 60093 | >1.0E+13 ohm.m | |
| Dielectric loss | 1000Hz | IEC 60250 | 0.0090 |
| Mechanical properties | Test Condition | Test Method | Ineos ABS/DP H603 |
|---|---|---|---|
| Tensile modulus | ISO 527-1 | 2000 MPa | |
| Tensile strain | 23℃，屈服 | ISO 527-1 | 2.6 % |
| Tensile stress | 屈服 | ISO 527-1 | 39.0 MPa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 28.0 KJ/m |
| -30℃ | ISO 179/1eA | 15.0 KJ/m | |
| 23℃ | ISO 179/1eU | No Break KJ/m | |
| -30℃ | ISO 179/1eU | 130 KJ/m | |
| fracture strain | ISO 527-1 | 0.00 % |
| Thermal performance | Test Condition | Test Method | Ineos ABS/DP H603 |
|---|---|---|---|
| vicat | 50℃/h 50N | ISO 306 | 100 ℃ |
| Linear coefficient of thermal expansion | parallel | ISO 11359-1 | 0.000090 cm/cm℃ |
| Heat distortion temperature | 0.45MPa，HDT | ISO 75-1 | 103 ℃ |
| 1.80MPa，HDT | ISO 75-1 | 98.0 ℃ |
Contact Us
Get App
Top