Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PA66 FG171 ASAHI JAPAN
Leona™
Electrical applications,switch,Hose
Glass fiber reinforced,Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
Impact strength of simply supported beam without notch | ISO 179 | 67 kJ/m² |
hardness | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
Rockwell hardness | M级 | ASTM D785 | 95 |
M级 | ISO 2039-2 | 95 |
Electrical performance | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
Compared to the Leakage Tracking Index (CTI) | 3.00mm | IEC 60112 | PLC 2 |
Volume resistivity | ASTM D257 | 1E+15 ohms·cm | |
dielectric strength | IEC 60243-1 | 28 KV/mm | |
Surface Resistivity | ASTM D257 | 1E+14 ohms | |
Volume resistivity | 23°C | IEC 60093 | 1E+15 ohms·cm |
dielectric strength | ASTM D149 | 28 KV/mm | |
Surface Resistivity | IEC 60093 | 1E+14 ohms |
Mechanical properties | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 2.5 % |
Tensile strain | 断裂,23°C | ISO 527-2 | 2.5 % |
bending strength | 23°C | ISO 178 | 244 Mpa |
ASTM D790 | 256 Mpa | ||
Flexural modulus | 23°C | ISO 178 | 9700 Mpa |
Tensile modulus | 23°C | ISO 527-2 | 10200 Mpa |
tensile strength | 断裂,23°C | ISO 527-2 | 154 Mpa |
Flexural modulus | ASTM D790 | 8900 Mpa | |
tensile strength | ASTM D638 | 162 Mpa |
flammability | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
UL flame retardant rating | 0.75mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
Shrinkage rate | MD | 内部方法 | 0.40 % |
Water absorption rate | 平衡,23°C,50%RH | ISO 62 | -- % |
Shrinkage rate | 吸水率(饱和,23°C) | 内部方法 | -- % |
TD | 内部方法 | 0.90 % |
Thermal performance | Test Condition | Test Method | ASAHI JAPAN/FG171 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 250 °C |
0.45MPa,未退火,HDT | ASTM D648 | 255 °C | |
0.45MPa,未退火,HDT | ISO 75-2/B | 256 °C | |
1.8MPa,未退火,HDT | ISO 75-2/A | 240 °C | |
Linear coefficient of thermal expansion | MD | ASTM D696 | 3E-05 cm/cm/°C |
Contact Us
Get App
Top