Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPEE YP003（YL-4530） SABIC INNOVATIVE US
LNP™ LUBRICOMP™ 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodSABIC INNOVATIVE US/YP003（YL-4530）
Multi axis Instrumented Impact EnergyISO 6603-226.9 J
Suspended wall beam without notch impact strength23°CISO 180/1UNoBreak
Impact strength of cantilever beam gap23°CISO 180/1A27 kJ/m²
Dart impact23°C,EnergyatPeakLoadASTM D376327.7 J
Mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/YP003（YL-4530）
Tensile modulusISO 527-2/1240 Mpa
ASTM D638207 Mpa
elongation屈服ASTM D63854 %
coefficient of frictionStaticASTM D3702Modified0.46
Flexural modulusISO 178270 Mpa
Tensile strain屈服ISO 527-240 %
Wear factorWasherASTM D3702Modified5.00 10^-10in^5-min/ft-lb-hr
tensile strength 屈服ASTM D63813.9 Mpa
屈服ISO 527-214.2 Mpa
coefficient of frictionDynamicASTM D3702Modified0.48
Flexural modulusASTM D790262 Mpa
physical property Test ConditionTest MethodSABIC INNOVATIVE US/YP003（YL-4530）
Shrinkage rateMD:24小时ISO 294-42.1 %
MD：24小时ASTM D9552.1 %
Water absorption rate24hr,50%RHASTM D5700.37 %
平衡,23°C,50%RHISO 620.50 %
Shrinkage rateTD：24hrASTM D9552.0 %
TD:24小时ISO 294-42.1 %
Thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/YP003（YL-4530）
Linear coefficient of thermal expansionTD：-40到40°CASTME8311.8E-04 cm/cm/°C
TD：-40到40°CISO 11359-21.8E-04 cm/cm/°C
MD：-40到40°CASTME8311.1E-04 cm/cm/°C
MD：-40到40°CISO 11359-21.1E-04 cm/cm/°C
Heat distortion temperature1.8MPa,未退火,3.20mm，HDTASTM D64847.2 °C

Contact Us

Get App

Top