Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PI, TS 680-3 ELANTAS PDG Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ELANTAS PDG Inc./680-3 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃ | J/m | 0.006to0.026 |
| film | Test Condition | Test Method | ELANTAS PDG Inc./680-3 |
|---|---|---|---|
| Elmendorf tear strength | MD | g | 6.8to38 |
| film thickness | mil | 0.95to3.1 | |
| Secant modulus | MD | 2793.1to3172.41 Mpa | |
| elongation | 断裂 | % | 72to95 |
| tensile strength | 断裂 | 191.72to241.38 Mpa |
| Electrical performance | Test Condition | Test Method | ELANTAS PDG Inc./680-3 |
|---|---|---|---|
| dielectric strength | 23℃ | V/mil | 390to7800 |
| dielectric constant | 23℃ | 2.95to3.45 | |
| Volume resistivity | 23℃ | ohms·cm | 4.0E+12到5.8E+15 |
| Dissipation Factor | 23℃ | 8.0E-4到2.1E-3 |
| Mechanical properties | Test Condition | Test Method | ELANTAS PDG Inc./680-3 |
|---|---|---|---|
| bending strength | 23℃ | 58.62to253.79 Mpa | |
| elongation | 断裂,23℃ | % | 4.0to8.0 |
| Flexural modulus | 23℃ | 2551.72to3220.69 Mpa | |
| compressive strength | 23℃ | 20.69to237.24 Mpa |
| physical property | Test Condition | Test Method | ELANTAS PDG Inc./680-3 |
|---|---|---|---|
| Water absorption rate | 23℃,24hr | % | 0.080to2.9 |
| Thermal performance | Test Condition | Test Method | ELANTAS PDG Inc./680-3 |
|---|---|---|---|
| RTI | °C | 130to210 | |
| RTI Elec | °C | 130to240 | |
| Linear coefficient of thermal expansion | MD | mm/mm/°C | 38.1E-5到50.8E-5 |
Contact Us
Get App
Top