Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPSU Stratasys PPSF Stratasys
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 170 J/m |
| Impact strength of cantilever beam gap | 23°C | ASTM D256A | 59 J/m |
| hardness | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| Rockwell hardness | M级 | ASTM D785 | 86 |
| Mechanical properties | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| elongation | 断裂,3.18mm | ASTM D638 | 3.0 % |
| Tensile modulus | 3.18mm | ASTM D638 | 2070 MPa |
| Flexural modulus | ASTM D790 | 2210 MPa | |
| bending strength | ASTM D790 | 110 MPa | |
| tensile strength | 3.18mm | ASTM D638 | 55.2 MPa |
| Electrical performance | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 1.1E-3到1.5E-3 | |
| dielectric strength | ASTM D149 | 3.1to11 kV/mm | |
| dielectric constant | ASTM D150 | 3.00to3.20 | |
| Volume resistivity | ASTM D257 | 5.0E+13到1.5E+14 ohms |
| flammability | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| Environmental stress cracking resistance | MotorOil10W-40,24hr:23°C | Passed | |
| PowerSteeringFluid,24hr:23°C | Passed | ||
| Thickness-LayerCapability | 254.0to330.2 µm | ||
| MotorOil10W-40,24hr:100°C | Passed | ||
| TransmissionFluid,24hr:100°C | Passed | ||
| Gasoline-Unleaded,24hr:23°C | Passed | ||
| PowerSteeringFluid,24hr:100°C | Passed | ||
| TransmissionFluid,24hr:23°C | Passed | ||
| WindshieldWasherFluid,50%,24hr:23°C | Passed | ||
| density | ASTM D792 | 1.28 g/cm³ | |
| Environmental stress cracking resistance | Antifreeze(Prestone),50%,24hr:23°C | Passed | |
| Antifreeze(Prestone),50%,24hr:100°C | Passed |
| Thermal performance | Test Condition | Test Method | Stratasys/Stratasys PPSF |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 189 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 5.6E-05 cm/cm/°C |
| Glass Transition Temperature | DMA | 230 °C |
Contact Us
Get App
Top