Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS MAGNUM™ 1150 EM Trinseo
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Trinseo/MAGNUM™ 1150 EM |
---|---|---|---|
Impact strength of cantilever beam gap | -29°C,3.20mm | ASTM D256 | 340 J/m |
Dart impact | 23°C,3.20mm,PeakEnergy | ASTM D3763 | 29.9 J |
Impact strength of cantilever beam gap | 23°C,3.20mm | ASTM D256 | 560 J/m |
Dart impact | -29°C,3.20mm,TotalEnergy | ASTM D3763 | 42.9 J |
23°C,3.20mm,TotalEnergy | ASTM D3763 | 45.2 J | |
-29°C,3.20mm,PeakEnergy | ASTM D3763 | 32.8 J |
Mechanical properties | Test Condition | Test Method | Trinseo/MAGNUM™ 1150 EM |
---|---|---|---|
elongation | 断裂,3.20mm | ASTM D638 | 30 % |
bending strength | 3.20mm | ASTM D790 | 58.9 MPa |
Tensile modulus | 3.20mm | ASTM D638 | 1750 MPa |
Tensile strain | Yield,3.20mm | ASTM D638 | 3.0 % |
Flexural modulus | 3.20mm | ASTM D790 | 1980 MPa |
tensile strength | 屈服,3.20mm | ASTM D638 | 36.5 MPa |
physical property | Test Condition | Test Method | Trinseo/MAGNUM™ 1150 EM |
---|---|---|---|
Shrinkage rate | MD:3.20mm | ASTM D955 | 0.60to0.70 % |
melt mass-flow rate | 230°C/3.8kg | ASTM D1238 | 0.90 g/10min |
density | ASTM D792 | 1.03 g/cm³ |
Thermal performance | Test Condition | Test Method | Trinseo/MAGNUM™ 1150 EM |
---|---|---|---|
vicat | ASTM D1525 | 112 °C | |
Heat distortion temperature | 1.8MPa,退火,3.20mm,HDT | ASTM D648 | 108 °C |
0.45MPa,Annealed,3.20mm,HDT | ASTM D648 | 111 °C | |
Linear coefficient of thermal expansion | MD:3.20mm | ASTM D696 | 9.5E-05 cm/cm/°C |
Heat distortion temperature | 0.45MPa,未退火,3.20mm,HDT | ASTM D648 | 96.1 °C |
1.8MPa,未退火,3.20mm,HDT | ASTM D648 | 82.2 °C |
Contact Us
Get App
Top